Classic Alfa production. Full set of uprated polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars. Stiffer (85 Shore) than the standard Alfa bush for improved rear axle location in high performance applications. As used by Paul Wignall in his very successful Giulietta Sprint rally car. These bushes are also far easier to install than the original item due to their split design. Can also be used on 102 Series 2000 and 106 Series 2600 models. Please enquire if you are after 34mm versions of this bush to fit the earlier trailing arms.
SU061 REAR SUSPENSION TRAILING ARM - REAR BUSH
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Approx 44mm diameter. See item code SU062 for an uprated version...
£9.50
SU063 REAR SUSPENSION TRAILING ARM - FRONT BUS…
Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Approx 50mm diameter. For earlier (pre 1968) cars with smaller...
£9.50
101-553 REAR SUSPENSION A ARM PERFORMANCE POLY…
Classic Alfa production. Uprated polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original...
£60.00
101-550 REAR SUSPENSION TRAILING ARM POLYURETH…
Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...
£120.00
750-550 REAR SUSPENSION TRAILING ARM POLY BUSH…
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body /...
£99.00
