Replacement conical bush for the rear suspension T arm on all 102 2000 and 106 2600 Series cars. Two required per car.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. Washers are used just at the body end of the trailing arm so two per...
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Approx 44mm diameter. See item code SU062 for an uprated version...
Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Approx 50mm diameter. For earlier (pre 1968) cars with smaller...
Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Approx 44mm diameter. Standard version of the bush...
Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair...
Rear wheel bearing to fit 102 Series 2000 cars and 106 series 2600 cars.
Rear halfshaft oil seal, for 102 and 106 series cars.
Front lower suspension bump stop to fit 1900, 2000 (102 Series) and 2600 (106 Series) cars.
Replacement front wheel bearing kit to suit 2600s. Consists of inner and outer bearing and oil seal.
Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...
Classic Alfa production. Polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original...
52mm diameter rear suspension bush to fit the rear 'A-Arm' on all 750 and 101 Series cars, the trailing arms on later 101 Series cars as well as the trailing arms on some 102 Series 2000 and 106...
Front hub oil seal 72 x 48mm
Replacement clutch kit to suit all 2600s. Consists of pressure plate, friction plate and release bearing.
Pair of replacement quarterlight seals for the 2600 Sprint.