75-MILANO PARTS : COOLING

We are taking delivery of 75 parts every week and will be adding them to our website as soon as they are unboxed and photographed.

Radiator rubber mount for Alfetta GTV and 75, including V6 models. Sold singly.

Radiator for the 75 V6 and TS. New (no exchange required).

Hose from the thermostat to the waterpump for the 75 TS

Upper radiator hose for the 75 TS.

Hose which runs from the T-piece to the water pump on 75 4-cylinder fuel injected models.

Hose which runs from the thermostat to the T-piece on 75 4 cylinder fuel injected models.

Expansion tank for the 75.

Expansion tank cap for the 75.

Lower radiator hose for fuel injected 4 cylinder 75 models.

Short hose on the thermostat housing for GTV6 and 75 V6 (two hoses normally fitted)

Radiator hose set in durable silicone for the 75 V6.

Water pump for the 75 V6 1989 onwards  Not suitable for the Zagato V6 SZ & RZ For V6 pumps with the pressed on pulley, please see D0349 Please compare pictures to your water pump carefully, before ordering. 

Radiator hose set in durable silicone for the 75 TS.

Bottom radiator hose (running from the water pump to the T-piece on the 75 V6 3.0.

Bottom radiator hose (running from the radiator to the T-piece on the 75 V6 3.0.

Water pump for the GTV6 and 75 V6 to 1989. From 1989 onwards, water pumps without the pressed on pulley, please see part D0355 Please compare pictures to your water pump carefully, before ordering. 

Thermostat for the GTV6 and 75 V6.

Water pump to fit Bosch fuel injected Spiders 89-93 with thermostatically driven/electric fans plus some 4 cylinder 116 and 75 models with injection and electric fans. Please compare pictures to your water pump carefully, before ordering. 

Thermostat in housing to fit late Bosch fuel injected Series 3 & Series 4 Spiders plus some fuel injected 116 and 4 cylinder 75 models.

Thermostat mounted in housing to suit all Series 3 Spiders fitted with carburettors plus some Alfetta and 75 models. Check angle of outlet in photos before ordering.

Square style radiator cap to suit 1750 105-series models from 1968 onwards, all Montreals and most 105/115 series models from 1970 onwards. Also fits many 116 and 75 models. Pressure rated to 0.7 bar - 10 psi.

Radiator fan switch for s4 spider and various 116 and 75 models that have electric cooling fans. Screws into rad. Can also be fitted in the top of the head at the back to run an electric fan in earlier carb-fed engines.   Will also fit Montreal. 

Small sized (13-20mm) stainless steel hose clamp/jubilee clip for general application on heater hoses etc.