750-101 SPIDER PARTS : BRAKES

Bracket which is bolted to pedal box casting, where the heat protection plate fixes on to it, protects the Brake master cylinder from heat generated by the exhaust system. 

Spring for brake pedal, to ft in the pedal box. Suitable for 750 & 101 cars. 

Repair kit to suit a 1 inch diameter Girling Brake Master cylinder as fitted to all 750 Series and early 101 Series (drum braked) cars as well as 1900 models, 102 Series 2000 cars and drum braked 106 Series 2600. Contains the rubber seals and dust boot.

1" brake master cylinder to suit all 750 Series and 101 Series cars with front drum brakes. Please note – This cylinder was made for Giulietta 750/101 cars which use a union connection. To use this master cylinder on cars with a banjo connection (1900,...

Rear wheel brake cylinder to suit 750 Series and early 101 Series cars with small rear brake shoes. One cylinder per wheel.

Brake pedal return spring, will fit all 750 & 101 series cars.

Front brake shoe return springs to suit 3 shoe cars, all 750 & 101 series cars. One kit does both front brakes. 

Front brake shoe return springs to suit 2 shoe cars, all 750 & 101 series cars. One kit does both front brakes. 

Rear brake shoe return springs to suit 750 & 101 series cars. One kit does both rear brakes. 

Rear brake cylinder retaining kit to suit 750 & 101 series cars. One kit does both rear brake cylinders.

Rear brake cylinder seal kit to suit 750 and 101 series cars with 7/8" rear wheel cylinders. One kit does both rear brake cylinders.

Pair of rear wheel brake cylinder mounting gaskets/gaiter to suit all 750 & 101 Series cars. This set covers both rear wheels where the brake cylinder mounts and the handbrake lever fits through the brake backing plate.

Rear wheel brake cylinder to suit 101 Series cars with the larger rear brake shoes. One cylinder per wheel.

Rear brake cylinder seal kit to suit 101 series cars with 0.7" rear wheel cylinders and larger rear brake shoes. One kit does both rear brake cylinders.

Top quality brass brake bleed screw/nipple to fit all 750 & 101 Series drum brake wheel cylinders. 3/8 UNF thread.

FISPA oil filter decal  for 750 Series, 101 Series, 102 Series (2000) Series cars. 

Mounting bracket to fit the single brake fluid reservoir on 750 and 101 Series cars, which is also used as a clutch fluid reservoir on some 106 Series 2600 cars.

Girling sticker for the brake fluid reservoir on early 750 Series cars. For the yellow sticker on later 750, 101, 102 and 106 Series cars, see item code 750-298. Also, new reservoirs are available under item code 750-299.

Complete brake fluid reservoir to suit all 750 & 101 Series cars, as well as 106 Series 2600 cars and possibly 102 Series 2000 cars as well. New production with rubber seal in cap and a better price! Mounting bracket also available - see code 750-299/1...

Yellow AGIP/SHELL decal to suit the brake fluid reservoir on later 750 Series, 101 Series, 102 Series (2000) and 106 (2600) series cars.  See code 750-299 for reservoirs to match and 750-298/1 for the Girling Decal to go onto earlier 750 Series cars.  

Brake union 5 way to suit most 105 series cars with standing pedals. This is normally fitted on the Bulkhead/Firewall in the engine bay. Not suiable for RHD cars with twin servo as the original union was 4 way.

BOSCH Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 & 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Front handbrake cable section to fit 750 series Spiders only. Short wheel base cars up to chassis #8000