750-101 SPIDER PARTS : CLUTCH

Pedal box spacer plate, all 750 and 101 cars. Stainless steel, includes fitting bolts. The master cylinder is hardly in an ideal position right next to the exhaust down-pipes or manifold, even if a heat shield is fitted. Installed inside...

Pedal box rubber seal, fits all 750 and 101 cars. Fits around the floor aperture, used with 750-184.

Clutch pedal return spring, will fit all 750 101 series cars.

Replacement bush for the bottom of the clutch pedal arms on 750 and 101 Series cars. Dimensions OD - 20mm, ID - 8mm, width - 19mm. May require slight trimming to fit some pedal arms.

Genuine Fitchel & Sachs mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars. WHEN ORDERING - PLEASE ALSO ORDER 2 x CL013/1 RETAINING CLIPS TO SUIT THIS NEWER DESIGN OF RELEASE BEARING.

Retaining clip required to fit the newer design clutch release bearing available under item code CL013 to all mechanical clutch cars. Two required per car.

Clutch release Bearing Adapter for 750/101 105 Cars. This adapter is designed to allow the use of a 1750/2000 engine and clutch in a 750, 101 and 105 models with a mechanical clutch. The car retains the original cable-actuated clutch linkage, but...

Mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars. Same application as CL013 but made to the original design.

Original Fitchel Sachs mechanical/cable clutch friction plate to suit 750, 101 and early 105 series cars. Use in conjunction with the pressure plate under item code CL016 and release bearing and clips under CL013 and CL013/1.

Mechanical clutch friction plate to suit 750, 101 and early 105 series cars. Use in conjunction with the pressure plate available under CL016 and the release bearing and retaining clips available under item codes CL013 and CL013/1.

Original Fitchel Sachs mechanical clutch pressure plate to suit 750, 101 and early 105 series cars. Use in conjunction with the friction plate available under item code CL015 and the release bearing and retaining clips available under item codes...