750-101 SPIDER PARTS : CLUTCH

FAST ROAD Mechanical/cable clutch kit to suit all cars with mechanical clutches, this replaces the conventional mechanical clutch. Features uprated pressure plate and release bearing and high performance friction plate. ...

Mechanical/cable clutch kit to suit all cars with mechanical clutches, this replaces the conventional mechanical clutch. Features uprated F&S pressure plate and release bearing and high performance friction plate.   Also suitable for GTA 105 and all...

Flywheel to cranckshaft half moon fixings, to fit 8 bolt 101 & 105 series flywheels found on 1300, 1600 & 1750 cars.

Flywheel bolt to fit 8 bolt 101 & 105 series flywheels found on 1300, 1600 & 1750 cars. See item code EN100 for bolts suitable for 2000 6 bolt style flywheels.

Pedal box rubber seal, fits all 750 and 101 cars. Fits around the floor aperture, used with 750-184.

Pedal box spacer plate, all 750 and 101 cars. Stainless steel, includes fitting bolts.  The master cylinder is hardly in an ideal position right next to the exhaust down-pipes or manifold, even if a heat shield is fitted. Installed inside the car between...

Lightweight billet steel fast road or competition 8 bolt flywheel 200mm, to suit 1300 & 1600 cars, fitted with a 105 tooth ring gear. Fits standard cable clutch cars. Will also fit all 101 cars. Please enquire for more details. Total weight -...

Clutch pedal return spring, will fit all 750 & 101 series cars.

Tab washer to suit the retaining bolts on an 8 bolt flywheel as fitted to 1300, 1600 and 1750 engines (except for 1600 Spider S4 engines that use 6 bolt flywheels). 4 required per engine. We recommend you replace any tab washer once it has been...

Bush for the bottom of the clutch pedal arms on 750 and 101 Series cars. Dimensions OD - 20mm, ID - 8mm, width - 19mm. May require slight trimming to fit some pedal arms.

Starter ring gear 105 teeth - suitable for all mechanical (cable) clutch cars including Giuliettas.

Retaining clip required to fit the clutch release bearing available under item code CL041 (rounded ends). Two required per car.

Mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars. Please check photos for measurements.

Retaining clip required to fit the newer design clutch release bearing available under item code CL013 to all mechanical clutch cars. Two required per car.

Original Fitchel & Sachs mechanical/cable clutch friction plate to suit 750, 101 and early 105 series cars. Use in conjunction with the pressure plate under item code CL016 and release bearing and clips under CL013 and CL013/1.

Mechanical clutch pressure plate to suit 750, 101 and early 105 series cars. Use in conjunction with the friction plate available under item code CL015 and the release bearing and retaining clips available under item codes CL013 and CL013/1.

Mechanical clutch friction plate to suit 750, 101 and early 105 series cars. Use in conjunction with the pressure plate available under CL016 and the release bearing and retaining clips available under item codes CL013 and CL013/1.