750-521 UPPER WISHBONE BUSH TRUNNION SEALING RING 750 SERIES CARS

Rubber/metal seal for the front wishbone bushes on 1900, 2000 and 2600 cars as well as 750 and 101 Series models. 41mm OD and 30.5mm ID. Part number 1365.45.709 Fits the lower wishbone bushes on the...

Sealing ring (approx 45mm OD) that fits between the steering idler and steering arm on 750, 101, 102 (2000), 106 (2600) and 105 Series cars. May also be fitted between the steering box...

Here is a diagram showing the location of some of the parts in this category.

Suspension bush to fit the front upper and lower control arms on 1900, 102 Series 2000 and 106 Series 2600 models. Sold separately, 8 bushes used per side, 16 per car. See 1900/102-061 for the bush...

Kit containing the ball joint, upper and lower sockets, dust cover and nut to suit the large lower suspension/steering ball joint to suit all 750 101 Series cars. Part of the components can...

Dust cover for the large ball joint in the lower front suspension wishbone and also the ball joint on the rear suspension A arm on all 750 & 101 Series cars.

Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. Washers are used just at the body end of the trailing arm so two per...

Here is a diagram showing the location of some of the parts in this category.

Here is a diagram showing the location of some of the parts in this category.

Replacement lower front wishbone bush to suit 101 Series cars. Two required per side, four per car. Approximate internal diameter 21.9mm. See 750-050 for the smaller bush for 750 Series cars.