Categories

Bolt for holding down the cam cover on all twin-cam 101, 105 and also 106 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car. Black "rifle" finish.

Full set of uprated (4 spring) ignition points (2 pairs) to suit the Marelli GTA distributor.

Circular rubber firewall grommet for the speedometer cable and some wiring on left hand drive Montreals.

New wiper linkage mechanism to fit all 105 Series GTs/GTVs. Includes spindles. Does not include the main support bar that the wiper motor bolts fixes to and attaches to the body frame - you will need to use that from your exisiting linkage mechanism.

Heat treated version of our 5.5 x 15" ET36 TZ/Ti Super replica alloy wheel for competition use. Tooling designed from an original Alfa/Campagnolo wheel copied in every detail including the original strengthening ribs on the rear...

Correct coarse grained black Vipla vinyl used in many 750 & 101 Series cars. Price is per metre length, rolls approx 1.4m wide.

Original colour and course grained pattern bright red vinyl to fit many 750 and 101 Series cars. Price is per metre length, roll approx. 1.4m wide.

Top quality (Würth brand) Nylock nut to fit the bolt in the front end of the rear suspension trailing arm on all 105 Series cars. Sold individually, 2 required per car.

Clear plastic gasket that fits behind the metal plate on the right B pillar bodywork on all Spiders 1966-93. See item code RB060/1 for the same part for the left side of the car.

Clear plastic gasket that fits behind the metal plate on the left B pillar bodywork on all Spiders 1966-93. See item code RB061/1 for the same part for the right side of the car.

Beautifully fabricated clutch master cylinder cover to fit left hand drive cars with standing pedals up to 1970. Reproduced as a direct copy of the original, including the pressed drain holes, in galvanized steel and finished in satin black.

As EN531 but drilled to suit 6 bolt crankshaft 2000 engines when fitted into an early pre-1968 car with mechanical clutch and gearbox. Suitable for 220mm ID 105 tooth ring gear (sold separately part number EN084). Designed and developed by...

Rubber plug/bung to fit all 105 Series Spider doors. Goes into the leading edge of the door to cover an access hole for a bolt on the quarterlight window frame. One used per door. Also fits Montreal doors.

Top quality head gasket to suit 1900 and 102 Series 2000 engines.

Complete engine gasket set to suit 102 Series 2000 engines. Includes head gasket. Does not include crankshaft oil seals - these are available separately under part numbers 1900/102-005 and 006.

Full engine gasket set (without Head Gasket) for the 2600 engine. Head gasket available separately - see item code 2600-001 or 2600/001/1. Please note, this kit does not include a rocker cover gasket or crankshaft oil seals - these are available...

Reversing light switch to suit most 105 Series gearboxes, using a small bracket to mount onto the bellhousing. See GB049 for the later version that screws into the bellhousing directly.

We have a version of the Steering Wheel Puller available for short term hire for those who do not wish to purchase it.  Cost is £15.00 (plus postage and VAT within the EU) with a £25.00 deposit that is refundable upon return of the puller to us in...

105 Series Alfas have a different method of removal compared to normal steering wheels as they are on a tapered spline. Without this special tool it is very difficult to remove the steering wheel and deal with any jobs that need to be done behind it! We...

Fuel hose clip to suit all Alfa fuel lines (usually 7mm internal diameter).

2600 rear brake caliper rebuild kit. This kit contains all the rubber parts required to rebuild two rear brake calipers on any 2600.

2600 front brake caliper rebuild kit. This kit contains all the rubber parts required to rebuild two front Girling brake calipers on any 2600.

Firewall grommet for the speedometer cable on left hand drive 105 series Giulia saloons and up to 1750 GTV cars up to 1970 with standing pedals. Also fits most 116 models including GTV6.

Giulietta front brake wheel cylinder repair kit to suit 2 shoe 1 inch diameter Girling brake systems. 1 kit does both front wheel cylinders.