Categories

Helix Autosport clutch friction plate to fit hydraulic clutch cars 1968-93. This version is suitable for fast road/trackday use and can be combined with the standard F&S clutch kit CL008 or LUK version CL007.

Metal housing for the bush attached to the outer end of the rear suspension T-bar. Two required per car. The actual bush is available separately under item code SU070 and thrust washers under code SU071.

Metalastic bush for each end of the rear suspension T-bar where it attaches to the body frame. Two bushes required per car. New housings for the bush are also available under code SU070/1. Thrust washers also available under code SU071

Classic Alfa Romeo grille badge - polished with a red background. Generally found on 6C 2500s as well as some 1900 models. 55mm diameter with two mountings on the rear.

Boot lid (trunk) seal to suit all 750 and 101 Series Spiders.  

Rubber seal for the chrome boot / trunk lock on all 750 & 101 Series Sprints.

Complete bootlid seal for all 750 & 101 Series Sprints

Upper door hinge spring to suit all 750 & 101 Series Spiders

Dash vent to suit Series 2 Spiders 1970-82 and possibly early Series 3 cars as well. Will also fit Roundtail Spiders, but a slightly different design to original. Outside Diameter: 79mm Inner Diameter (where the vent slots down into the dash): 72mm

Bonnet/hood release cable to suit all Spiders 1986 onwards.

Bonnet/hood release cable to suit all Coupes 1964-76, Junior Zagato and all Spiders to 1986.  

Re-release from Pirelli of the correct metric sized Cinturato tyre as fitted to 2000 and 2600 Alfas in the 1960s.  If you want to keep the original style and appearance of the tyres on your car, but take advantage of modern tyre compounds and...

Top quailty 13 row 230mm high/long MOCAL oil cooler. Fit in conjunction with an oil filter sandwich plate kit available separately. Please enquire for more details. See item code EN572 for a kit to suit pre '72 style canister oil filters,...

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105, 116 and 75 engines (excluding Ts and V6). The same washers are also used on Montreal engines - please enquire in need. Note that the aluminium...

A pair of 'half moon' rubber seals for the back of the camshaft housing at the rear of the cylinder head on 4 cylinder 105, 116 and 75 engines.

Fuel tank to suit all Giulia saloons. Will also fit 1750 Berlina and can also fit the 2000 Berlina, but is a smaller fuel capacity than an original tank.

Short vertical throttle rod that fits between the carburettors on twin carburettor 101 and 105 series cars. Includes metal ends and spring retaining clips. This will fit right hand drive cars and some left hand drive cars. Ball joint...

Clutch kit to suit all 2600 (106) and 2000 (102) with hydraulic clutches. Consists of pressure plate, friction plate and release bearing. ** NOTE ** - The release bearing may not fit all 102 models. If your existing release bearing is different from the...

5 wire connection wiper motor to suit all Spiders 1986 to 1993.

Wiper motor with 3 wire connection to suit Coupes, Roundtail Spiders and Saloons up to the early 1970s.

Rear right tail light lens for Carello style 2000 Berlina light units and also 1600 Junior Zagato - as well as a large range of other Italian exotica, ranging from Alfa Junior Zagato and De Tomaso Panteras to Maserati Khamsins!

Engine mount for 102 Series 2000 and 106 series 2600 cars. Mounts are identical left and right - Sold individually, 2 required per car.

Beautifully made carpet set in grey to suit late 1750 GTV Mk1 cars, 1750 GTV Mk 2, 2000 GTV and late GT Juniors. Produced in the correct style to suit all right hand drive cars.

Beautifully made grey carpet set, made in the correct style to fit all right hand drive Sprint GT, Sprint GTV, GTA Stradale and 1750 GTV Mk 1 cars. To be fitted in conjunction with the rubber heel mats available under part IN056/2.