Categories

Starter ring gear with 130 teeth to suit all hydraulic clutch 2000 engines with carburettors. If you have a fuel injected car, see item code EN086/1 for USA spec cars (131 teeth) or EN086/2 for European spec cars from 1986 onwards. ** NOTE...

Starter ring gear with 110 teeth. Suitable for all hydraulic clutch 1300, 1600 & 1750 engined cars.

Starter ring gear 105 teeth - suitable for all mechanical (cable) clutch cars including Giuliettas.

Valve shim to fit standard valve stem size of 9mm - available in sizes from 1.5mm (.059") to 3.5mm (.138"). Suitable for all 4 cylinder 101, 105, 116 and 75 engines including V6 but excluding TS. Please specify the sizes you need on the drop-down menu...

Full interior sound deadening kit to suit all left hand drive 105 GTs with standing pedals. These kits have been precisely cut to shape to perfectly fit the contours of your GT. This also makes installation a lot easier! *Please note, some...

Full interior sound deadening kit to suit all left hand drive 105 GTs with hanging pedals. These kits have been precisely cut to shape to perfectly fit the contours of your GT. This also makes installation a lot easier! *Please note, some...

Inner bulkhead sound deadening to suit all 105 hanging pedal GTs and all hanging pedal GT Juniors. These sound deadening mats are perfectly cut to shape to make for an easy installation.

Black slide on style wiper arm cap to fit those 105, 115 and 116 Series cars with this style of wiper arm.

Dynamat SuperLite is a high-efficiency sound dampening material used to stop noise and vibration in your automobile. It is the same sticky butyl rubber Constrain Layer Damper (CLD) as Dynamat Xtreme but in a 30% thinner, and lighter form. Use Dynamat...

Rubber seal for the quarterlight glass hinge. Fitted on all models of GT, GTV and Giulia/Berlina saloons.

Beautifully made inner door panels to suit GT Juniors from 1970 onwards. Done in the correct style and skai brown (Cinghiale) the type without the veins. Sold as a pair.  If you also require rear panels please see IN265 Please note these panels are...

Applying Dynamat to panels, doors eliminates panel distortion by transforming the flimsy sheet metal into a solid non-resonant baffle. Dynamat improves stops vibration rattles and squeaks. The Xtreme Bulk Pack controls vibration four times better than...

Grey slide on style wiper arm cap to fit those 105, 115 and 116 Series cars with this style of wiper arm.

Rear fitch panel right 1970-82

Rear flitch panel left 1970-82

Front flitch panel right 1970-82

Front flitch panel left 1970-82

Fantastic production of the later style of interior courtesy light lenses as used in 2000 GTVs, late GT Juniors, 2000 Berlinas and late Giulia saloons. Includes the 'clear' section for increased illumination. Sold as a pair to fit each side of the car.

Top quality (Würth brand) Nylock nut to fit the 4 bolts that attach the front suspension spring pan to the wishbone, as well as each track rod end and the 4 bolts on the rear axle shafts that bolt up the wheel bearing housing on each side.

4 bolt exhaust gasket to fit the joint between the manifold and the downpipe on 750 and early 101 Series cars.

1/4NPT ninety degree elbow hose fitting to suit the Facet Red Top pump available under code FL063/1. Suits 5/16" or 8mm fuel hose.

1/8 ninety degree elbow hose fitting to suit the Facet Silver Top pump available under code FL063. Suits 5/16" or 8mm fuel hose.

1/4NPT straight hose fitting to suit the Facet Red Top pump available under code FL063/1. Suits 5/16" or 8mm fuel hose.

1/8NPT straight hose fitting to suit the Facet Silver Top pump available under code FL063. Suits 5/16" or 8mm fuel hose.