Categories

Handbrake grip Spider 1990-93

Brown/tan vinyl seat cover to suit cars from 1978 to 1984 in the correct style and material to replace your worn or damaged seat covers. Replace along with the seat base foam available under Code IN091 and, if rusty, the metal seat base available under...

Beautifully made enamel version of the 'Milano' style front grille / bootlid badge. Suitable for all 750/101 series cars and 105 series cars pre-1972. Will also fit later cars too. 55mm diameter with two mounting pins on the rear. If you need this...

Headlamp bowl - for GT junior 1971-77 1750GTV Mk 1 and some Giulia Supers. We also sell a version with adjuster for 1750GTV Mk2 and 2000GTV under Item code LT009/1.

Set of high performance racing Ferodo DS3000 pads to suit our big brake conversion kits available under item codes BR200 and BR201. Height - 51mm Width - 113mm  

Set of high performance Ferodo DS2500 brake pads to suit the Big Brake conversion kits available under item codes BR200 (1750/2000 cars) and BR201 (1300/1600 cars) For the race version in DS3000 please go to the Race / Performance parts section of the...

Approximately 4 feet/1.2m of straight heater hose to fit all 105 Series cars.

Moulded heater hose shaped to suit the later heater unit as found in Kammtail/Series 2 Spiders, 1750/2000 GTVs & GT Juniors and Giulia and Berlina Saloons from about 1968 onwards. Specifications changed at different times on...

Moulded heater hose shaped to suit the earlier heater unit as found in Roundtail Spiders, Sprint GT & GTVs and Giulia Saloons up to about 1968. Specifications changed at different times on different models, so you need to check what your car is...

Set of big end/con rod bearings .030 o/size to suit 1600, 1750 and 2000 engines.

Set of big end/con rod bearings 020 oversize to suit 1600, 1750 and 2000 engines.

Set of big end/con rod bearings +010 oversize to suit 1600, 1750 and 2000 engines.

Standard sized big end/con rod bearings to suit 1600, 1750 and 2000 engines including TS. Please note, due to current shortage of raw materials, we will either supply King or ACL bearings. If you have a preference, please state this in the comment...

Plastic Alfetta early GTV6 2.5 Boot badge. Beautifully made.

Rubber seal with moulded corners to fit the rear window glass to the supporting frame. Two different types were fitted on Montreals throughout production. Please check your car carefully before ordering. Alternative style please see MN021/1 ...

Rubber style carburettor mounting kit (for a pair of carburettors) to suit cars that are using a solid alloy carb mount. This is a good alternative/upgrade to the regular thackery washers that are normally used.

Nylon insert for headlight adjuster screw. Fitted on non-Stepfront GTVs & GT Juniors and Giulia and Berlina saloons from approximately 1968 onwards.

Plastic Alfetta GTV6 2.8 Boot badge. Beautifully made.

Plastic Alfetta GTV6 3.0 Boot badge. Beautifully made.

A pair of seals (left and right) to fit between the lens and the light unit on all Montreals.

Standard (non heat-treated) version of our 5.5x 15" TZ/Ti Super replica alloy wheel - Natural finish. Wheel offset is ET 36, weight is approximately 8 kg per wheel. Our wheels have steel wheel stud inserts fitted to allow regular wheel changing without...

Beautifully made front seat covers to fit the special seats in 1750GTV Mk 1 models, with twin movable headrest, generally found in cars for the Australian market. Produced in the correct original style, pattern and colour of materials - black vinyl for...

Beautifully made full set of seat covers to fit the special seats in 1750GTV Mk 1 models, with twin movable headrest, generally found in cars for the Australian market. Produced in the correct original style, pattern and colour of materials - black vinyl...

Plastic Alfetta GTV6 2.5 Boot badge. Beautifully made.