CL003 CLUTCH MASTER CYLINDER - ALL LHD HANGING PEDALS CARS

Clutch master cylinder repair kit to fit all left hand drive cars with hanging pedals, including some Montreals. Please check your old cylinder before ordering - if your master cylinder has 3 seals...

Clutch master cylinder to fit all 105 Series cars with standing pedals - all hydraulic clutch right hand drive cars 1968-78 and left hand drive cars from 1968 to 1970. 19mm bore. Not suitable...

Beautifully fabricated clutch master cylinder cover to fit left hand drive cars with standing pedals up to 1970. Reproduced as a direct copy of the original, including the pressed drain holes,...

Clutch pedal pivot shaft for left hand drive cars 105/115 & Montreal series cars with hanging/top hinged pedals.

Clutch master cylinder repair kit to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders.

Pedal box frame left hand drive standing pedal cars

Brake fluid reservoir for left hand drive cars from 1970 with hanging pedals. This is the later style also used on the Alfetta 116 series and has a blanked off side exit for this application. Aso...

Original ATE Reservoir to fit the clutch master cylinder available under CL003 CLUTCH MASTER CYLINDER. Fits all left hand drive 105 series cars with hanging pedals, including Series 3 and Series 4...

Single circuit brake master cylinder to fit left hand drive 105 Series cars 1966 on with standing pedals and a brake servo. Cylinder bore is 22mm. Note that some cars use a master cylinder similar to...