GB034 DIFFERENTIAL PINION OIL SEAL 1300-1750 CARS

Replacement rear halfshaft oil seal to suit 1300, 1600 1750 rear axles with the smaller diameter halfshafts used to approximately 1974. See item code SU026 for the equivalent seal for the...

Replacement differential pinion oil seal to suit 2000 Limited Slip axles. Inside diameter 45mm, OD 74.50mm, width 12mm. See GB034 for the matching seal for 1300, 1600 and 1750 non-limited slip axles.

Here is a diagram showing the location of some of the parts in this category.

Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts...

Differential pinion outer (front) bearing to fit the smaller pinion shaft found in 1300-1750cc engined cars. Internal diameter 28mm, OD 68mm, width 21.5mm. Also used on 1600cc 101...

OE quality rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards and all 1600 cars from 1975 onwards. One kit does...

Replacement differential bottom oil pan gasket to suit all 105 series 1300 / 1600 / 1750 cars as well as 750/101 models . For non-limited slip axles.

Differential shoulder/halfshaft inner bearing to suit the smaller diameter halfshafts on standard 1300-1750cc cars. Internal diameter 38mm, OD,76mm, width 21 mm. Also used on 1600cc engined...

Differential pinion nut to fit all 105 Series 1300 to 1750 differentials as well as all 101 Series differentials/rear axles

Differential pinion inner (rear) bearing to suit the smaller pinion shaft found on 1300-1750cc cars. Internal diameter 32mm, OD 71.5mm, width 27mm. Also used on 1600cc 101 series cars