GB055 DIFFERENTIAL HALFSHAFT INNER BEARING LIMITED SLIP AXLES

Differential pinion inner (rear) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 34.9mm, OD 76.2mm, width 29.4mm. This item will also...

Differential shoulder/halfshaft inner bearing to suit the smaller diameter halfshafts on standard 1300-1750cc cars. Internal diameter 38mm, OD,76mm, width 21 mm. Also used on 1600cc engined...

Rear half-shaft oil seal to suit 2000 limited slip rear axles with the larger diameter half-shafts used from 1972 onwards and all rear axles from about 1975 on (including non LSD axles)...

Axle halfshaft inner bearing for all 102 and 106 series cars.

Differential pinion outer (front) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 33.3mm, OD 68.26mm, width 22.2mm.

Differential pinion oil seal to suit 2000 Limited Slip axles. Inside diameter 45mm, OD 74.50mm, width 12mm. See GB034 for the matching seal for 1300, 1600 and 1750 non-limited slip axles.

Differential friction plate to fit the limited slip differential as fitted to 2000cc 105 series models plus certain 75s. Additional plates can be added to increase the differential lock. ** OE...

Rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards, as well as all 1600 cars from 1975 onwards. One kit does one side...