Spacer for the thinner versions of the castor arm bush usually fitted to cars up to the mid/late 1970s. Fits where the castor arm attaches to the top arm of the front suspension. Not required on cars with Superflex polyurethane bushes, but often missing on cars with the standard rubber bushes. Two spacers normally required for each side of the car.
SU038 CASTOR ARM BUSH
Castor arm bush
£4.50
SU039 CASTOR ARM BUSHES - SUPERFLEX- PAIR
Polyurethane castor arm bush to fit in the top suspension arm on all 105 Series cars. A worthwhile replacement for the standard rubber bush and much more long-lasting. We recommend Superflex as...
£22.00
SU143 CASTOR ARM ROD
Castor arm rod to fit all 105 Series Coupes, Saloons and Spiders.
£21.00
SU037 CASTOR ARM BALL JOINT
Castor arm ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals.
£18.00
SU033 TOP ARM INNER BUSH
Top arm inner bush
£7.50
SU094 REAR TRAILING ARM - NO BUSHES
Rear suspension trailing arm to fit all 105 Series cars 1967 onwards.
£80.00
SU043/2 LOWER WISHBONE BUSH SPACER WASHER
Spacer washer for the lower wishbone bush on all 105 series cars. One washer used per bush. Bushes are available separately under item code SU042. Wishbone bush nut under item code SU042/1. Tab...
£3.55
D0335 BUSH FOR INJECTION MANIFOLD STAY ARM
Bush for the stay arm that supports the plenum on S4 spiders plus fuel injected 4 cylinder 116 and 75 models.
£50.00
SU061 REAR SUSPENSION TRAILING ARM - REAR BUSH
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Diameter - 44mm (approximately) See item code SU062 for an...
£9.50