Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy uprated (75 Shore) from the standard Alfa bush for improved rear axle location without loss of ride comfort. These bushes are also far easier to install than the original item due to their split design. The 4 washers supplied are used on the bushes which go in the body / floorpan end of the trailing arms (the front). They are not needed on the rear of the trailing arm. For the 34mm version of this bush to fit the earlier trailing arms see item code 750-550.
101-551 REAR SUSPENSION TRAILING ARM PERFORMAN…
Classic Alfa production. Full set of uprated polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars. Stiffer (85 Shore) than the standard Alfa...
£125.00
101-552 REAR SUSPENSION A ARM POLYURETHANE BUS…
Classic Alfa production. Polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original...
£75.00
750-550 REAR SUSPENSION TRAILING ARM POLY BUSH…
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body /...
£110.00
SU061 REAR SUSPENSION TRAILING ARM - REAR BUSH
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Diameter - 44mm (approximately) See item code SU062 for an...
£9.50
SU067 REAR SUSPENSION TRAILING ARM BUSH - PAIR
Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair...
£42.00
SU063 REAR SUSPENSION TRAILING ARM - FRONT BUS…
Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Diameter - 50mm (approximately) For earlier (pre 1968) cars...
£9.50
101-553 REAR SUSPENSION A ARM PERFORMANCE POLY…
Classic Alfa production. Uprated polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original...
£75.00
SU062 REAR SUSPENSION TRAILING ARM - REAR BUSH…
Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Diameter - 44mm (approximately) Standard version of...
£15.00
SU064 REAR SUSPENSION TRAILING ARM - FRONT BUS…
Uprated (shore 80 rating) rubber bush to fit the front joint of the trailing arm to the body on all 105/115 series cars including Montreals. Diameter - 50mm (approximately) Standard version of the...
£15.00