1900-102 PARTS : FRONT SUSPENSION & STEERING

Right hand thread track rod end to suit 102 series 2000 and 106 series 2600 models.

Left hand thread track rod end to suit 102 series 2000 and 106 series 2600 models.

Tie rod end, left hand thread for 2nd series 1900 cars. These use 16x1.5mm thread.

Tie rod end,right hand thread for 2nd series 1900 cars. These use 16 x1.5 mm thread.  

Koni adjustable front shock absorber to fit 1900 series, 102 Series 2000 and 106 Series 2600 cars. Two required per car, we strongly recommend replacing shock absorbers as a pair.

Front lower suspension bump stop to fit 1900, 2000 (102 Series) and 2600 (106 Series) cars. 

Bush for the vertical steering arm/pin on the front suspension of 1900, 102 Series 2000 and 106 Series 2600 models. Two bushes used per side, four per car. Sold separately

Suspension bush to fit the front upper and lower control arms on 1900, 102 Series 2000 and 106 Series 2600 models. Sold separately, 8 bushes used per side, 16 per car. See 1900/102-061 for the bush to fit the vertical steering pin, 1900/102-062 for the...

Vertical steering king pin to fit 1900, 102 Series 2000 and 106 Series 2600 models. One used per side, two used per car. Sold individually.  

Horizontal front suspension pin to fit 1900, 102 Series 2000 and 106 Series 2600 models. Two used per side, four per car. Sold individually.  

Steering column grommet to fit 102 Series 2000 and 106 Series 2600 cars.

Lock Tab washer for splined hub 1900. Only for cars with splined front hubs for wire wheels..

Front wheel bearing kit to suit 2600s. Consists of inner and outer bearing and oil seal.

Front bump stop small, fits 1900, 2000 and 2600. Two per side. Can also be used as an Engine limit buffer (bump stop) on Sprint Veloce, Spider Veloce, SS & SZ Giulietta.  This buffer is either screwed into a bracket on the lower chassis rail, or is...

Front anti-roll bar rubber for standard anti-roll bar. Fits into bracket at the front of main chassis frame rails. Two bushes required for each car. Can be adapted to be used on 2000 (102) Touring and 2600 (106) series cars

2MM bush to suit 101 series steering idler boxes. Will also fit later 750 series cars, approximately 1958 onwards. Bush approx. 24mm ID and 28mm OD. These bushes need reeming to suit your existing pin. Also used on 2000/2600. You need to order two bushes...

Bush +5MM to suit 101 Series steering idler boxes. Will also fit later 750 series cars, approximately 1958 onwards. Bush approx 24mm ID and 28mm OD. We also sell a +2mm bush under item code 101-020/1. These bushes need reeming to suit your existing pin. ...

Rubber/metal seal for the front upper wishbone bushes on early 750 Series models. 32mm OD and 24.5mm ID.  Fits the upper wishbone bushes on the following 750 models (8 used per car): Berlina to chassis #1488.20800Sprint & Sprint Veloce to 14963...

Rubber/metal seal for the front wishbone bushes on 1900, 2000 and 2600 cars as well as 750 and 101 Series models. 41mm OD and 30.5mm ID. Part number 1365.45.709 Fits the lower wishbone bushes on the following 750/101 models (8 used per car): Berlina to...

Sealing ring (approx 45mm OD) that fits between the steering idler and steering arm on 750, 101, 102 (2000), 106 (2600) and 105 Series cars. May also be fitted between the steering box and steering arm on some cars. Also used as a lower wishbone trunnion...