75-MILANO PARTS : EXHAUST

Exhaust manifold for cylinders 2 & 3 for all 4 cylinder 116 and 75 models except twinspark.

Exhaust clamp to suit all standard sized (51mm) 116 and 75 series exhaust systems (not V6). Usually one clamp per car, located on the join between the centre and rear exhaust mufflers.

Exhaust clamp to suit all standard sized (48mm) 116 and 75 series exhaust systems (not V6). Usually one clamp per car, located on the join between the centre and rear exhaust mufflers. This clamp also fits Montreals on the join between the front and...

Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.

Composite cylinder head to exhaust manifold gasket to suit 75 twin spark engine.

Copper cylinder head to exhaust manifold gasket to suit all 101 and 105 series engines plus 4 cylinder 116 models and 4 cylinder 75 engines (not TS).

Set of 2 metal plates and the insert for the bolt hole on the rubber exhaust hanger on all 105/115 series cars. Two sets are required for each hanger, usually 4 per car (2 rubber hangers). Also fitted to 750, 101, 102 (2000) and 106 (2600)...

Exhaust tailpipe o-ring for the joint between the centre and rear sections of the exhaust on cars which require a 68mm O ring.

Bush for the gearbox/exhaust hanger bracket that bolts to the gearbox or transaxle on 105, 116 and 75 models. 2 required per car on 105 models and 1 per car on 116 and 75 models.