-
MORE PARTS WILL BE ADDED TO THIS CATEGORY SOON
We are taking delivery of 116 and Alfetta parts every week and will be adding them to our website as soon as they are unboxed and photographed.
-
FL125 MISAB CARB WASHER SET
Misab carburettor washer set to suit cars with solid carb mounts. These gaskets will do 40mm/45mm/48mm carbs and are compatible with Webers, Dell'orto Solex.
¥2,555.75 -
D0462 FUEL PUMP RELAY - ALFETTA GTV6 / 75 V6
Fuel pump relay to suit all Alfetta GTV6's and 75 V6's. This relay has been encased in a custom 3D printed plastic shell, with the original BOSCH part number inscribed on the top (0.332.514.121)
¥22,018.81 -
-
D0407 MALPASSI FUEL FILTER RUBBER SET 42mm ALF…
Malpassi Fuel filter set 42mm GTV 116
¥2,359.16 -
D0334 INJECTOR O-RING
O-ring that seals the injector into the inlet manifold on fuel injected 105 (115), 116 and 75 engines, including GTV6 and 75 V6.
¥1,071.45 -
D0333 MECHANICAL FUEL PUMP (TOP & SIDE OUTLETS…
Mechanical fuel pump for 105 and 116 series carb engines with outlets to the top and side.
¥5,897.90 -
D0332 MECHANICAL FUEL PUMP (SIDE OUTLETS)
Mechanical fuel pump for 105 and 116 series carb engines with inlet and outlet pointing to the side.
¥5,897.90 -
D0040 SHORT AIR INTAKE HOSE GTV6 & 75 V6
Short air intake hose for GTV6 and 75 V6.
¥2,349.33 -
D0043 AIR INTAKE HOSE SILICONE GTV6 & 75 V6
Air intake hose for GTV6 and V6 75 models. Made in long lasting silicone.
¥21,625.62 -
D0042 AIR INTAKE HOSE GTV6 & 75 V6
Air intake hose for GTV6 and V6 75 models.
¥14,105.80 -
D0041 AIR FILTER V6
Air filter for all V6 116 and 75 models.
¥2,948.95 -
D0039 PLASTIC SUPPORT FOR AIR HOSE VALVE COVER…
Plastic support bracket for some 4 cylinder 116 and 75 models.
¥10,321.32 -
D0038 AIR FILTER 15X37CM
Air filter for some 116 models. 15cm diameter by 37cm length. Please check measurements before ordering.
¥2,359.16 -
D0037 AIR FILTER 1.6 - 2.0 4CYL CARS 15X34CM
Air filter for some 116 models. 15cm diameter by 34cm length. Please check measurements before ordering.
¥4,964.06 -
D0036 BREATHER BLANKING PLATE
Blanking plate for use where you are using a GTA oil cap and therefore do not need the standard breather elbow.
¥2,850.65 -
D0035 CAM COVER TO AIR FILTER BREATHER GASKET…
Gasket for the joint between the cam cover and breather elbow on 105 and some 116 models.
¥442.34 -
D0488 SUPPORT FOR INJECTION MANIFOLD STAY ARM …
Support for the stay arm that supports the plenum on S4 spiders plus fuel injected 4 cylinder 116 and 75 models. Can also be used for supporting the electric fuel pump on all injection cars.
¥786.39 -
D0336 FUEL PRESSURE REGULATOR 4CYL INJECTION C…
Fuel pressure regulator for S4 spiders and fuel injected, 4-cylinder 116 and 75 models.
¥18,676.67 -
D0335 BUSH FOR INJECTION MANIFOLD STAY ARM
Bush for the stay arm that supports the plenum on S4 spiders plus fuel injected 4 cylinder 116 and 75 models.
¥9,829.83 -
FL004 MECHANICAL FUEL PUMP (TOP OUTLETS)
Mechanical fuel pump to fit all carburettor-equipped 105 series cars plus 101 series 1300 and 1600 Normale cars. Also fits some Alfetta models. Mounting gaskets and plastic spacer blocks are available separately. This is a new production...
¥5,897.90 -
FL124 CARBURETTOR MOUNTING KIT (RUBBER STYLE)
Rubber style carburettor mounting kit (for a pair of carburettors) to suit cars that are using a solid alloy carb mount. This is a good alternative/upgrade to the regular thackery washers that are normally used.
¥1,671.07 -
FL092 THACKERY WASHER
Thackery washer, carburettor mounting. 5/16 - M8 fitting.
¥88.47 -
FL004/1 FUEL PUMP GASKET
Gasket for the fuel pump mounted on the lower front timing cover on carburettored 101 Normale and 105 Series cars plus 116 and 75 models with carbs.. There should be two gaskets fitted - one either side of the plastic insulating spacer block...
¥245.75