116 ALFETTA PARTS : FILTERS

Accelerator cable GTV6 LHD. 

Malpassi Fuel filter set 42mm GTV 116

Air intake hose for GTV6 and V6 75 models. Made in long lasting silicone.

Air intake hose for GTV6 and V6 75 models.

Air filter for all V6 116 and 75 models.

Plastic support bracket for some 4 cylinder 116 and 75 models.

Air filter for some 116 models. 15cm diameter by 37cm length. Please check measurements before ordering.

Air filter for some 116 models. 15cm diameter by 34cm length. Please check measurements before ordering.

Blanking plate for use where you are using a GTA oil cap and therefore do not need the standard breather elbow.

Gasket for the joint between the cam cover and breather elbow on 105 and some 116 models.

Spin-on style oil filter to suit 105 series engines from about 1972 onwards plus all 116 and 75 models. High quality, direct alternative for original sized Alfa oil filters made by the O/E manufacturer for Ferrari (UFI) or BOSCH filter. Also fits...

Spin-on style oil filter to suit 105-series engines from 1972 onwards plus all 116 and 75, including V6. Original branded filter now produced in a smaller size to suit more modern engine bays with restricted space/access. Good for Series 4 Spiders where...

Useful in-line universal fuel filter that can serve as additional fuel filtration or as a cheap replacement for the original filter unit. Suitable for all carburettor-equipped models.

Bosch in-line fuel filter to suit fuel injected Spiders 1987-93 and fuel injected 116 and 75 models, including V6.  

Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. 4 cm long/tall and 3.3 cm diameter. For the seal between glass bowl and unit order FL078.

Filter king fuel filter rubber seal. 

Filter king fuel filter & regulator with glass bowl

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 and 116 series cars. Note that this fits both the early style 'crossover' air-cleaner setups as well as the later tubular style air-cleaners.

Metal strap to fit the tubular air filter canister fitted to 105 Series cars from about 1970 to 1986 plus some 116 models.

Cylindrical Air filter - later type (105.48) - length 41cm x 12 cm diameter to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before ordering!

Late style tubular air filter, as normally fitted to carburettored S3 Spiders and some 116 models - 35cm long and 12cm diameter tapering to 11cm. Please check the measurement of your old filter!

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...