Categories

The small plastic rivet that retains the top of door rain seals on all Spiders. One rivet is used on the rear of door glass seal (available under codes RB046 & RB046/1) and two on the front of door rain seal on each door (codes RB045 &...

Headlight mounting bracket for the right hand side of all Step-Front GTs from 1964 onwards. For later cars, see code ST149.

Engine block strengthening plate & windage tray. Bolts to main bearing caps & sump mounts and improves torsional rigidity and reduces oil drag on the rotating crankshaft. 105 blocks with 140bhp+ can twist and cause bearing failure. This plate reduces...

Engine block strengthening plate & windage tray. Bolts to main bearing caps & sump mounts and improves torsional rigidity and reduces oil drag on the rotating crankshaft. 105 blocks with 140bhp+ can twist and cause bearing failure. This plate reduces...

Rubber seal for the rear section of the bonnet/hood opening on all 750 & 101 Series Spiders

Grommets for air ducting tubes, pair

Outer polished headlight ring to suit 750 and 101 Series Sprint Speciales. Sold individually.

A pair of horizontal chrome side grille bars to suit 750 and 101 Series Sprint Speciales except "low-nose" 750 cars.

Centre grille / heart to suit 750 and 101 Series Sprint Speciales except "low-nose" 750 cars.

Set of 11 dust boots to suit all the track rod ends and ball joints on all 750/101 cars. Covers 6 track rod ends, 4 front suspension ball joints and 1 rear suspension ball joint.

Pair of Montreal engine mounts - left and right side.

Set GTA Junior body decals - comprising bonnet serpent, side cloverleafs, side stripes and bootlid script in white adhesive vinyl.

Set GTA junior decals - comprising bonnet serpent, side clovers and bootlid script - done in green to go on white cars.

1750 badge to go on the rear panel of Series 2 Kammtail 1750 Spiders from 1970-72 and 1750 Berlina. Overall Height - 2.3cm Width - 15.1cm

1600 badge to fit the rear panel on 1.6 Spiders 1970-78 and on 1600 Junior Zagato

1300 script badge for the rear of 1300 Series 2 Spider 1970-82 and 1300 Junior Zagato

2000 script badge as fitted to the rear panel of Series 2 2000 Spiders and 2000 Berlina saloons.

Set of 2 metal plates and the insert for the bolt hole on the rubber exhaust hanger on all 105/115 series cars. Two sets are required for each hanger, usually 4 per car (2 rubber hangers). Also fitted to 750, 101, 102 (2000) and 106 (2600)...

Spacer for the thinner versions of the castor arm bush usually fitted to cars up to the mid/late 1970s. Fits where the castor arm attaches to the top arm of the front suspension. Not required on cars with Superflex polyurethane bushes, but often missing...

Polyurethane castor arm bush to fit in the top suspension arm on all 105 Series cars. A worthwhile replacement for the standard rubber bush and much more long-lasting. We recommend Superflex as they only use very high quality TDI polyurethane as opposed...

Castor arm bush

Carburettor rebuild kit to suit Dell'orto dhla40 carburettors - kit does 2 carburettors.

Carburettor rebuild kit to suit Solex 40mm ADDHE carburettors - kit does 2 carburettors.

Carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors