Categories

Giulia GTC bootlid script badge

Plastic "2.0" script for rear of Series 4 Spiders 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car.  

Plastic "Spider" script for rear of Series 4 Spider 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car.  

Chrome plastic Alfa Romeo rear script for Series 4 Spiders 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car. Overall Height - 5cm Width - 24.1cm

Aluminium GTA door skin - right side of car

Aluminium GTA door skin - left side door

GT splash panel rear right, now made in aluminium to avoid corrosion later.

GT splash panel rear left, now made in aluminium to avoid corrosion later.

GT splash panel front right, now made in aluminium to avoid corrosion later.

GT splash panel front left, now made in aluminium to avoid corrosion later.

Set of 4 screws to fit the smaller tail light units fitted to 1300, 1600 & 1750 GT/GTV models. Kit includes 1 x 33mm screw, 1 x 27mm screw and 2 x 25mm screws. May also fit some saloon rear lenses as well. Note, from our research, Saloons may use the...

Bolt for rear suspension trailing arm. Goes through the bush at the rear of the arm and connects the rear anti-roll bar to the suspension. 2 required per car.

Propshaft centre support bush and bracket to suit Hydraulic clutch models 1968 onwards. Holds the centre support bearing available separately under code GB030, which is retained by a circlip also available under code GB030/1.

Front gearbox to bellhousing oil seal - to fit cars with hydraulic clutches.

Front gearbox to bell housing oil seal to suit mechanical clutch 750/101/102/105 cars and all 2600 (which are hydraulic clutch). NOT suitable for early "split case" 750 gearbox.

Red sticker for rad cap

Square style radiator cap to suit 1750 105-series models from 1968 onwards, all Montreals and most 105/115 series models from 1970 onwards. Also fits many 116 and 75 models. Pressure rated to 0.7 bar - 10 psi.

Round style radiator cap to suit 1600 Roundtail spiders, Step-front cars (to 1970) and equivalent Giulia saloons. Also fits 101 Series (and possibly 750 series) cars as well. Pressure rated to 0.5 bar - 7.25 psi. Also used on the expansion tank on the...

Reproduction of early Bosch style rotor arm - fixed to distributor shaft with a screw. This style of rotor arm is always combined with the two piece ignition points available under code IG016.

Standard 105 series engine mounts are sometimes found to be too soft for competition use, allowing the engine to move around too much under load. These heavy duty engine mounts are ideal for high performance engines and competition use, while still...

Standard 105 series engine mounts are sometimes found to be too soft for competition use, allowing the engine to move around too much under load. These heavy duty engine mounts are ideal for high performance engines and competition use, while still...

Pair of Carello 2600 (106), 2000 (102) Sprint & Junior Zagato (105) indicator clear units. Will also fit USA market mk1 1750 GTV 1968-1969. If you require an amber lens, please specify this at check out. These are fitted as sidelights or sometimes...

Carello 2600 (106), 2000 (102) Sprint & Junior Zagato indicator amber lens, right hand. Will also fit USA market mk1 1750 GTV 1968-1969.

Carello 2600 (106), 2000 (102) Sprint & Junior Zagato indicator amber lens, left hand. Will also fit USA market mk1 1750 GTV 1968-1969.