Categories

Outer door handle seal to suit all Spiders with flush door handles 1970-93.

Plastic clip to attach door trim panel on Series 4 Spiders 1990-93. (also used on some late series 3 spiders) QUANTITY OF CLIPS REQUIRED FOR EACH DOOR: **Some** Series 3 Spider from 1988-89: IN106 X7 IN078 X7 IN079 X7 Late Series 3...

Door panel clip receiver to fit all Spider door trims. This part fits into the door frame on all Spiders, quantity depending upon the model/year of the car. Used in conjunction with IN078 that attaches to the trim panel. Also suitable to be used for the...

Door panel retaining spring clip to suit all Spider door trim panels 1966-84 (also used on some early series 3 spiders). Use in conjunction with the clip receiver available under item code IN079.  

Cable window regulator to fit the right hand door of all Spiders 1974-89 without electric windows. Note that this regulator has a splined shaft length of approximately 40mm. Earlier regulators have a shaft length of approximately 30mm. Check yours...

Cable window regulator to fit the left hand door of all Spiders without electric windows 1974 - 1989. Note that this regulator has a splined shaft length of approximately 40mm. Earlier regulators have a shaft length of approximately 30mm. Check yours...

Pair of rear taillight body to car seals to sit Sprint GT to 1750 GTV Mk 2. Note - does not suit the special taillights fitted to 1750 GTV Mk 1 - see LT021/1

Standard rear suspension trailing arm bush to fit pre-1968 cars which use a smaller bush on the arm to body joint. Bush approx 36mm diameter.

Uprated (shore 80 rating) rubber bush to fit the front joint of the trailing arm to the body on all 105/115 series cars including Montreals. Diameter - 50mm (approximately) Standard version of the bush is available under item code SU063 and...

Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Diameter - 44mm (approximately) Standard version of the bush is available under item code SU061 and...

Reproduction deep 3 row GTA sump pan. Nicely cast in aluminium. 4.8kg. Requires a GTA oil pump if you are fitting to a non-GTA engine.

Spacer plate for bell housing. Please check photo carefully, to make sure this part is correct for your vehicle. This spacer is generally fitted on cars with hydraulic clutch from 1968-1975  

Spacer plate for bell housing. Please check photo carefully, to make sure this part is correct for your vehicle. This spacer is generally fitted on later cars from 1983 onwards.   If you require the starter motor spacer, please see EL068 STARTER MOTOR...

Original style billet steel 8 bolt flywheel to suit 1300, 1600 & 1750 engines fitted with 110 tooth ring gear and a standard hydraulic clutch.

Original style billet steel 6 bolt flywheel to suit 2000 engines, with 130 tooth ring gear fitted - Fits standard hydraulic clutch. Weight - 8.3kg

Alfa Romeo Spider - The Complete story. Covers models from the 750 Giulietta series, through to the 916 Spiders. 

Lightweight billet steel fast road or competition 8 bolt flywheel 200mm, to suit 1300 & 1600 cars, fitted with a 105 tooth ring gear. Fits standard cable clutch cars. Will also fit all 101 cars. Please enquire for more details. Total weight -...

Lightweight billet steel fast road or competition 8 bolt flywheel, to suit 1300, 1600 & 1750 cars, fitted with a 110 tooth ring gear 215mm. Fits standard hydraulic clutch. Please enquire for more details. Total weight - only 7.3kg! ** NOTE **...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. 105 tooth ring gear, 200mm driven plate. Also suitable for using a later 6 bolt 1600 crank in an early engine. Total weight -...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines, with 130 tooth ring gear fitted. Fits standard hydraulic clutch. Please enquire for more details. Total weight - only 7.3kg!

Rubber seal that sits along the front edge/lip of the scuttle grille panel on all 105 Series GTs/GTVs.

Pair of taillight seals to fit the unique 1750 GTV Mk 1 taillights with the long oblong reflector.

Spring pan to drop link 'bolt' to suit the later style drop links used on late Series 3 and all Series 4 Spiders. Drop links available separately under codes SU102 and SU102/1. Two of these are required per car, one on each end of the bar. This bolt is...

Anti-roll bar drop link to suit later Series 3 and all Series 4 Spiders. This one is for the right side of the car, looking from the rear. See item code SU102 for the matching part for the left side of the car and also SU102/2 for the drop link to spring...