Categories

105.24 body type plate Spider Veloce left hand drive models, 1971-1982.

Reproduction 1750GTV & GTAm side grilles, made in aluminium. The mesh pattern is slightly larger than the original design (improved airflow for extra cooling!). The small plastic "egg timer" grilles are available separately under our part number CH010.

Synchro ring - grooved type for early gearboxes to fit 750, 101, 102, 106 (2600) and early 105 Series gearboxes (cars with a mechanical clutch).

Rear light lens seals, will fit either left or right side. Between the lenses and the light backing on a Kammtail Spiders 1970-84 Price is for one seal. 

105.39 body type plate to suit left hand drive Giulia Ti 1300, 1965-1972.

Rotor arm to suit 8 plug GTA distributor with 10mm shaft, usually found on 1300 GTAs and some 1600 cars.

Inlet manifold gasket to fit all early carburettor 101 and 105 series cars. For later carburettor cars see code FL022 and for later Fuel Injected cars see FL039.

Jim Evans valve spring kit - for use with our 1300 / 1500 valves with a 9/32" stem. Under extreme use some competition valve springs can bind their inner and outer springs - these will not.

OE quality SKF propshaft centre bearing for all 750, 101, 102 Series 2000, 106 Series 2600  and 105 series cars, including Montreals plus 4 cylinder 116 and 75 models. Inside diameter 30 mm, OD 62 mm, width 16 mm. Features metal shields optimised for...

2MM bush to suit 101 series steering idler boxes. Will also fit later 750 series cars, approximately 1958 onwards. Bush approx. 24mm ID and 28mm OD. These bushes need reeming to suit your existing pin. Also used on 2000/2600. You need to order two bushes...

Repair section for the top of the right rear wing under the side window. A common place for these cars to rust! Fits all GT / GTV - 1964-77.

Repair section for the top of the left rear wing under the side window. A common place for these cars to rust! Fits all GT / GTV - 1964-77.

New production from the original manufacturer of top quality gearbox synchro rings to fit later 105 Series gearboxes, as well as later Alfetta and 75 based cars - including V6 versions. The best synchro rings available for your gearbox, produced in...

105.05 Body type plate to fit a right hand drive 1600 Roundtail Spider 1966-67.

Correct original style allen headed screw to fit the steering column shroud/cover on most 105 Series cars (but not Montreal). Sold individually. Usually the column shroud/cover has a combination of two 'short' and three 'long' screws - which are...

Correct original style allen headed screw to fit the steering column shroud/cover on most 105 Series cars (but not Montreal). Sold individually. Usually the column shrouds have a combination of three 'long' screws and two 'short' screws - which are...

105.03 body type plate to fit left hand drive 1600 Roundtail Spider 1966-67.

Special sized brake disc (265mm OD) to fit 1966-67 model year cars with early ATE front brakes, mainly 1600 Roundtail Spiders and 1600 Sprint GT Veloce models.

Water pump seal to fit 1300cc 750 & 101 Series engines, 1900 engines, 102 Series 2000 engines and 106 Series 2600 engines.

Set of 4 high quality (Payen brand or similar) valve guide oil seals to fit 8 mm diameter valve stems on 75 twinspark and 750-series engines.

Valve spring retainer to fit performance valves with 8mm stem diameters. Sold individually.

Inlet valve guide to match the performance valve with 8mm diameter valve stem available under item code EN589.

Valve guide to fit FIA specification GTA inlet valves with 8mm stem diameter. Please note that original GTA valves were 8.5mm stem, we use an 8mm valve as it will improve intake flow.

Valve guide to fit FIA specification GTA exhaust valves with 8mm stem diameter. Please note that original GTA valves were 8.5mm stem, we use an 8mm valve as it will improve exhaust gas flow.