Categories

Rebuilt large front brake caliper (ATE fitment) - left side - to fit 1750/2000 cars. Please note some of our stock are rebuilt reproduction calipers, we cannot guarantee you will receive a caliper with original ATE markings. Please note this...

Genuine Bosch distributor cap to suit earlier style distributors with 'offset' clips (1963-1974). This cap has a small semi-circle cut out on the edge of the cap and a female cutout to accept a small male locating lug on the body of the...

Facet reproduction of the Bosch 'offset clip' style cap usually fitted to earlier cars (1963-1974), much cheaper than the original Bosch part (our part IG012) and similar quality. This cap has a small semi-circle cut out from the edge of the cap and...

Silicone Rubber rear crank oil seal (Akron) - 101, 105 and some 116 engines. Not fuel injected spiders or TS. Also fits V6 models.

Narrow focus Carello rear number/licence plate light unit as used on late 750 all 101 Series cars. Require a 207 bulb - our part number LT085.

Set of aluminium vented brake disc backing plates, for 1750 and 2000 cars.     

Wheel hub in aluminium front, 105/115 Cars - ATE Brakes. Made in Italy. Ergal / Aluminium 7075. CNC Machined. 970g. For competition use. Sold individually.    

Centre console inner fixing frame for the gear gaiter. To fit Spiders 1970-86

Centre console inner fixing frame for the gear gaiter. To fit Spiders 1987-93. 

Black right hand side B-Post trim panel to fit Spiders Roundtail. Made in plastic as per original. 

Ball joint, for the throttle linkage. Ball head diameter - 8mm Works in conjunction with FL052/1.

Reproduction rear number/licence plate light unit as used on all 105 Series GTs, GTAs GTVs up to 1750 GTV Mk 1 models with the rounded style bumpers and Giulia saloons and some Mk 1 1750 Berlinas. Sold individually. Require a 207 type bulb, our...

B post trim panel for Series 3 and Series 4 Spiders in tan/beige vinyl.

Bonnet/hood spring rest bracket, late GTV / GT Junior non-stepfront cars.

GTA Aluminium rear panel & boot latch inner frame - Y piece. 

Rear number plate light bracket for all early step-front GT and 1750 GTV Mk1. Beautifully made as per the original.

New, reproduction right side rear brake caliper (ATE fitment) to fit all cars 1967 - 1993. No exchange required.  

New, reproduction left side rear brake caliper (ATE fitment) to fit all cars 1967 - 1993. No exchange required.

Complete clutch master cylinder to fit 102 Series 2000 and 106 Series 2600 models.

Dust cover for the large ball joint in the lower front suspension wishbone and also the ball joint on the rear suspension A arm on all 750 & 101 Series cars.

Bush for the throttle linkage mechanism arm. Also used on the clutch pivot arm on mechanical clutches. 

Bush for the throttle linkage mechanism where it pivots on the firewall/bulkhead. Two required per car.

Radiator overflow piping to suit all 105 series cars. Can also be used for cars with expansion tanks. Price is per metre of tubing.  

Upper rear panel for all Series 4 1990-93. Covers the area from the bumper up to the bootlid, including the rear lights. Pressed from original Pininfarina tooling.