Categories

Small metal washer that sits on top of the gearbox top seal (available separately under code GB039) and is retained by the gear lever.

Rubber grommet for where the steering column passes through the firewall on left hand drive 105 Series cars 1971 - 1989 with hanging pedals.

Base of seat cover to fit 2000GTV and GT Junior from 1972-77 in the correct brown (Cinghiale) skai vinyl. Ideal if your seat base is marked or damaged and you only wish to replace that section of the cover.

Central grab handle on the header rail that you use to raise and lower the soft top on all Spiders 1966-93.

Sprint Veloce bootlid script to fit 750 and 101 Series Giulietta Sprint Veloces.

Front of soft top seal to suit all 750/101 Spiders

Headlight ring to fit a 101 Series Spider.

Headlight ring to fit all 101 Series Sprints. Will also fit later 750 Series cars with the larger (7") headlights.

Large style 101 Series rear/tail light to suit 1960 onwards Sprints

2 piece rear light lens to fit 101 Series Spider. 

52mm diameter rear suspension bush to fit the rear 'A-Arm' on all 750 and 101 Series cars, the trailing arms on later 101 Series cars as well as the trailing arms on some 102 Series 2000 and 106 series 2600 cars. See item code 750-016 for the smaller...

Lower front valance for all 1600 Roundtail Spiders 1966-67. Similar to ST065, but without the small oval hole at the base.

Roundtail Spider lower front valance. This version is for the 1750 and 1300 Junior models. See ST065/1 for the 1600 Roundtail version.

Lower front valance (27cm high) to fit all step-front Bertone GTs 1964-70.

Base of seat cover to fit 2000GTV and GT Junior from 1972-77 in the correct black skai vinyl. Ideal if your seat base is marked or damaged and you only wish to replace that section of the cover.

Front hub oil seal Please note these are included with SU020 wheel bearing kit.

Front wheel bearing grease cap to suit all 750, 101 and 105 Series cars. Dimensions: Inner Diameter - 47.7mm Outer Diameter (not including collar) - 50mm Height - 30mm

45mm paper carburettor gasket. ** NOTE ** - Unmodified cars will use the 40mm gasket instead (FL021).

40mm paper carburettor mount gasket to fit 40mm Weber, Solex and Dellorto carburettor mounts. 2 required per rubber mount/carburettor throat. Hole spacing - 72mm ** NOTE ** - Some 1600 S3/S4 Spiders (and some late Alfettas) use a gasket with 80mm...

Small rubber gearbox seal. sits under the gear lever and on top of the metal plates on the rear 'tower' of the gearbox. Use in conjunction with the small washer available under code GB039/1.

Altissimo style one piece clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT155 for the matching lens for the left hand side.

Altissimo style one piece clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT156 for the matching lens for the right hand side.

Tool bag leather & jack tie down strap. Fitted on 750 & 101 Giulietta & Giulia Spider

Horn push button to fit original Momo steering wheel hubs. Limited stocks! NON MILANO Will require the creation of a simple packing ring to make a good interference fit in our steering wheel hub adaptors.