Categories

Front hub oil seal Please note these are included with SU020 wheel bearing kit.

Front wheel bearing grease cap to suit all 750, 101 and 105 Series cars. Dimensions: Inner Diameter - 47.7mm Outer Diameter (not including collar) - 50mm Height - 30mm

45mm paper carburettor gasket. ** NOTE ** - Unmodified cars will use the 40mm gasket instead (FL021).

40mm paper carburettor mount gasket to fit 40mm Weber, Solex and Dellorto carburettor mounts. 2 required per rubber mount/carburettor throat. Hole spacing - 72mm ** NOTE ** - Some 1600 S3/S4 Spiders (and some late Alfettas) use a gasket with 80mm...

Small rubber gearbox seal. sits under the gear lever and on top of the metal plates on the rear 'tower' of the gearbox. Use in conjunction with the small washer available under code GB039/1.

Altissimo style one piece clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT155 for the matching lens for the left hand side.

Altissimo style one piece clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT156 for the matching lens for the right hand side.

Tool bag leather & jack tie down strap. Fitted on 750 & 101 Giulietta & Giulia Spider

Horn push button to fit original Momo steering wheel hubs. Limited stocks! NON MILANO Will require the creation of a simple packing ring to make a good interference fit in our steering wheel hub adaptors.

Early front suspension bush kit standard - including lower wishbone bushes, castor arm bushes, anti roll bar rubbers & drop link bushes. From 1962-1967

This book focuses exclusively on the right hand drive model variants of the Tipo 105 series.   All the photographs contained within the 264 pages are contemporary, most of which are published here for the first time, documenting the different variants of...

Complete front upper nose panel to fit Euro specification Roundtail Spiders.

2nd series Giulietta Spider rear reflectors seals. For 101 1300 cars only. Sold as a pair. 

2nd series Giulietta Spider rear reflectors. For 101 1300 cars only. Sold as a pair.  If you also require the backing seals, please order 750-143/1

A pair of engine mounts to fit the 101 Giulia 1600 Normale (single carburettor). 

Set of four plated brass tyre valve caps with knurled finish.

Carello branded reflector fitted to Giulietta and Giulia SS. They fit in the end of the rear bumper side blades. 2 per car.

Clear rear/tail light lens to fit Sprint Speciales - used in some markets instead of the amber lens. See 750-320 for red lens and 750-320/1 for amber lens.

Amber rear/tail light lens to fit Sprint Speciales. See 750-320 for matching red rear lens and 750-320/2 for clear lens.

Altissimo style one piece amber and clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT114 for the matching lens for the left side of the car - looking from the driver's seat.

Altissimo style one piece amber and clear sidelight/indicator lens to fit Giulia saloons. Approx 140mm between mounting screws. See LT114/1 for the matching lens for the right hand side.

Horn push button to fit original Momo steering wheel hubs. Limited stocks! Will require the creation of a simple packing ring to make a good interference fit in our steering wheel hub adaptors.

Set of three lens screws to fit the front sidelight on all Kammtail Spiders 1970-84.

Sponge rubber seal for either side front sidelight on all Series 2 Spiders 1970-84.