Categories

Circlip for retaining GTA wheel centre badge.

Wheel centre badge 48mm diameter, silver background with black snake/cross. Fits GTA wheels, original Montreal Cromodora wheels, and the optional 2000 GTV Cromodora Electron wheels. Fits into the GTA wheel centres. The circlip is...

Wheel centre badge 48mm diameter, black background with silver snake/cross as per original. Original fitment to GTA wheel and the original Montreal Cromodora wheels, as well as the optional 2000 GTV Cromodora Electron wheels. Fits into the wheel...

Rubber hanger for the exhaust system on all 105/115 series cars. Normally two per car. Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars. Metal plates and inserts for the rubber hangers are available under item code EX036

Rear axle bump stop to suit all 105 Series cars. Two required per car. These fit all cars, however the early cars with Dunlop brakes originally used a larger version which we now sell under part number SU073. Also available: Bump stop mounting...

Front suspension bush kit uprated - including lower wishbone bushes, Superflex castor arm bushes, Superflex anti roll bar rubbers, drop link bushes. Please state year & model of car when ordering & whether a sport anti roll bar has been fitted and if it...

Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)

Propshaft universal joint to suit 105 series cars (not Montreals) from 1968 onwards. Roller cage is 24mm in diameter. Earlier cars (750, 101 and 105 Series to 1968) with the earlier style propshaft centre support should use part number 750-100...

Rubber gaiter that fits over the transmission tunnel aperture cover (that attaches to the transmission tunnel pressing) inside the cockpit of all 105 series Coupes, Saloons and Spiders. Is covered by the centre console in cars with the...

Clutch master cylinder to fit all left hand drive 105 Series cars with hanging pedals 1970-93, including Montreals. Reservoir available separately - see code CL002 if you require the unions, please click on the links below. You will...

Gasket to fit the thermostat housing with the 'drop in' style thermostat fitted to 105 Series cars from approx 1968 to 1982.

'Drop in' style engine cooling system thermostat to fit most 105 Series cars from 1968-83, all Montreals and some Alfetta models. As the intake manifolds are interchangeable, these are often found on earlier cars as well, so please check that your...

Thermostat early type (screw in). Fits early 105 cars, 2600 cars and 101 1600 Veloce models.

Rotor arm to suit the late Series 4 Spider 1990-93. Also fits some 1988-89 Series 3 cars.

Chromed cylinder head nut for 1750 2000 engines with larger head studs including TS.

Classic Alfa production! Bare ashtray base for 1750 Spider Veloce - made in the UK in the correct, original style - metal base which requires to be trimmed in thin foam and then the original Alfa black vinyl. Beware of plastic imitations that aren't even...

Set of standard front brake pads to suit Dunlop brakes.

Pair of seat frames backrest adjusting screws. Normally found on 101 Spider seats, however some late 750 cars may be fitted with these screws also.

Pair of seat frames bolts for 750 & 101 Spiders.

Junior Zagato front indicator repeater light.

Inlet manifold outlet for the heater hose 10mm. 

Inlet manifold outlet for the heater hose 6mm. 

Classic Alfa exclusive! Steering column shroud. Fits 2000 GTV and late GT Junior with a 2000 GTV style dashboard, 2000 Kammtail Spiders and 2000 Berlina. Also fits 1750 GTV USA model.

Under bonnet quilting/insulation mat for the 2600 Touring. ** NOTE ** - There are 2 different sizes of quilt that were fitted to these cars so please check the diagram in the last photo to make sure you are buying the correct one for your car. These...