CLEARANCE

Outer door handle to suit all GTs, GTVs, GTCs & GTAs 1964-77 - right side. Made from the original tooling. This handle is brand new, it is just missing its corresponding keys.

Cable style window regulator to fit GTs/GTVs. This is for the right side. This regulator is brand new. It is just not a production we usually sell.

Console centre section for European specification (i.e non-USA market) Spiders from 1970-82. This section is brand new however it has had a cutout made to fit a brake fluid / handbrake warning light.

Reservoir to fit the clutch master cylinder available under CL003 CLUTCH MASTER CYLINDER. Fits all left hand drive 105 series cars with hanging pedals, including Series 3 and Series 4 Spiders and Montreals. These reservoirs are brand new, they are...

Pertronix electronic ignition kit - for later cars to replace 1 piece Bosch points, delivers twice the power to the spark plugs, reliable starting every time! Uses Hall effect magnetic sensor in place of the points and unlike optical systems it isn't...

Front right overrider to suit 1750 mk2 and 2000 GTVs. This overrider is brand new. However we usually sell them as part of a bumper kit.

Lucas voltage regulator. Fits early 750 cars and some 1900 cars. This regulator is brand new, however it has a small crack to the top cover as can be seen circled in the photos.

Beautifully made rear seat cover trim set to suit the rear seat of 1750 GTV Mk 2 models. This version is done in early Cinghiale brown vinyl as found in the earlier Mk 1 1750's. This is not the factory original style but is still a beautifully made piece.

1970-84 Spider front light lens - left. This lens is brand new it just has a few minor surface scratches due to storage that are barely visible.

Enamel/metal serpent C pillar badge to fit Giulia Saloons. Dimensions: Height - 55mm Width - 41mm Thickness - 2mm This badge is brand new, it is just a slightly different shade of green to the normal ones we sell, with more of a matte finish to the...

Heat treated version of our 5.5 x 15" TZ/Ti Super replica alloy wheel for competition use. Tooling designed from an original Alfa/Campagnolo wheel copied in every detail including the original strengthening ribs on the rear...

Upper rear panel for all Series 4 1990-93. Covers the area from the bumper up to the bootlid, including the rear lights. Pressed from original Pininfarina tooling. This panel is brand new it just has a small dent on the upper lip that will need fettling...

Ignition switch to fit all Montreals. This switch is brand new however it has a loose connection that may want attention. It is also missing the sheer bolt that usually comes with this kit.

30mm aluminium rear spring shim/spacer to fit all 105 Series Saloons, Coupes Spiders. Used to adjust the rear ride height on cars from the factory. This set is brand new, they are just not a height we usually sell.

7 inch H4 bulb style headlight to fit Left Hand Drive Step-front GTs (in Europe/USA) and all European specification left hand drive Spiders 1966-93 and USA specification cars 1966 to 1974 and 1982 onwards without the sidelight inside the headlamp...

Left side 'hook end' style wiper arm to fit Step-front GTs, Roundtail Spiders and early Giulia Supers. This arm is brand new. We just usually sell these in pairs.

Complete Altissimo style sidelight indicator unit to fit the right side of a Giulia Super or Ti with the two piece amber/clear lens and the chrome metal divider. This unit is brand new and in perfect condition.

Rear left taillight body to car seal to suit Sprint GT to 1750 GTV Mk 2. This seal is brand new. We usually sell them as pairs.

Heater motor to suit Giulias/GTs with 173mm fan diameters. Brand New.

Steering wheel hub adaptor to fit both Nardi and Momo aftermarket steering wheels to Spiders with splined steering columns and power steering. Includes horn push and Alfa badge. Not suitable for cars fitted with an airbag. This set is...

Set of original AE pistons to suit a 2000 nord engine. This set is brand new and includes the rings and gudgeon pins. We just usually sell this set complete with liners.

OE piston and liner to suit 1300 nord engines. This piston an liner is brand new, however it is missing a gudgeon pin.

Original AE Borg/Goetze 2000 liner. This liner is brand new we just usually sell them as part of a full set. Inner Diameter - 84mm

25mm aluminium rear spring shim/spacer to fit all 105 Series Saloons, Coupes Spiders. Used to adjust the rear ride height on cars from the factory.