105 SPIDER PARTS : CLEARANCE

22mm open wheel nut - right hand thread chromed. Classic Alfa production of these original style wheel nuts.

Brake fluid reservoir for left hand drive 105 series cars from 1970 with hanging pedals. Also fits some 116 models. 3 cap version. Also suitable for LHD Montreals. This reservoir is brand new. It is just missing one of the caps. As can be seen in...

Pair of polyurethane front anti-roll bar droplink bushes to suit early 105 series cars. These bushes are brand new. They are just not a production we usually sell.

Early style voltage regulator (Bosch) to suit all 105 series cars with dynamos/generators as well as 101 series cars as well. This regulator is brand new. It has just been slightly scratched up on delivery to us.

Pair of rubber seals that fit between the top of the front wings and the scuttle panel on Spiders. Originally fitted to later Series 3 and 4 Spiders, but can be fitted to any Series 2 car as well. These seals are brand new. They are just an old,...

Plastic "Spider" script for rear of Series 4 Spider 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car. This badge has broken into two parts, this would...

Left section for the spoiler/air dam found on Series 3 Spiders from 1985-89. This panel is brand new, it is just an old production we used to sell.

Coil to distributor high tension ignition lead to suit Series 4 Spider (and late fuel injected S3) 1988-1993 plus fuel injected 4 cylinder 75s. Brand new, just usually sold as a set.

Cylinder 4 high tension ignition lead to suit Series 4 Spider (and late fuel injected S3) 1988-1993 plus fuel injected 4 cylinder 75s. Brand new, just usually sold as a set.

Cylinder 3 high tension ignition lead to suit Series 4 Spider (and late fuel injected S3) 1988-1993 plus fuel injected 4 cylinder 75s. Brand new, just usually sold as a set.

Cylinder 2 high tension ignition lead to suit Series 4 Spider (and late fuel injected S3) 1988-1993 plus fuel injected 4 cylinder 75s. Brand new, just usually sold as a set.

Pair of Weber 45 DCOE rampipes. These are brand new, they are just not a production we usually sell. Distance from flange to rolled opening - 3cm Total height - 6.7cm

Cloverleaf metal keyring. These keyrings are brand new we just don't usually sell this production.

Clutch master cylinder boot to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders. This clutch boot is brand new, it is just not a production we usually...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. This flywheel was used for Classic Alfa R&D and is therefore missing its ring gear which you can buy separately under the...

Lightweight billet steel competition 6 bolt flywheel to suit 2000 competition engines using early mechanical clutch. 105 tooth ring gear, 200mm driven plate. Also suitable for using a later 6 bolt 1600 crank in an early engine. This flywheel...

Rear brake pads - set of 4 - to suit 105 cars with ATE brakes. These pads are brand new they are just not a brand we currently sell - ALA (made in italy)

Beautifully made right side inner door trim panel to suit Series 4 and some late 3 Spiders from 1989-93. Done in the correct style and skai black material and includes the heat pressed trim lines as well. This panel is brand new, we just...

Upper rear panel for all Kamm-tail Spiders 1970-83. Covers the area from the bumper up to the bootlid. Pressed from original Pininfarina tooling. This panel is brand new it is just not a production we usually sell.

Left trim panel that fit in the footwells of all Roundtail Spiders from 1966-70. These panels are brand new, they are just an old production that we usually sold in pairs. Vinyl wrapped around metal.

Exhaust flexi joint for custom exhausts, this joint has an outer bore size of 50mm on one side and 54mm on the other.

Series 4 (1990-93) seat cover in black vinyl. Beautifully made in the correct style. Sold singly. This seat cover is in full vinyl unlike our usual production with an alcantara centre STANDARD PRICE: £190.00 (EXC VAT)

Beautifully made inner right door trim panel to suit Spiders from 1978 -84. Done in the correct style and skai brown material and includes the heat pressed trim lines as well. This is the right side only.

Upper rear panel for all Series 4 1990-93. Covers the area from the bumper up to the bootlid, including the rear lights. Pressed from original Pininfarina tooling. This panel has a dent in the right corner as can be seen in the photos. STANDARD PRICE:...