-
EX052 STANDARD STAINLESS STEEL COMPLETE EXHAUS…
Complete stainless steel exhaust system to suit 2000 Spiders 1970-86. Please specify the year, model and engine size of your Spider in the comments section of the order, so that we can ensure this system will fit perfectly. Please note, this system is a...
£430.00 -
EX004 COMPLETE EXHAUST - ROUNDTAIL SPIDER 1966…
Complete mild steel exhaust system to suit Roundtail Spiders 1966-69 with the correct style chromed tailpipe. Please confirm your year and engine size when placing your order so that we make sure you receive the correct system for your car...
£200.00 -
EX002 COMPLETE EXHAUST - SPIDER 1970-86
Complete mild steel exhaust system to suit Spiders 1970-86. Please specify the year, model and engine size of your Spider in the comments section of the order so that we can ensure we send you the correct system for your car. Made in Italy by IMASAF - OE...
£200.00 -
EX005 COMPLETE EXHAUST - SPIDER 1987-93
Standard two piece exhaust system to suit Spiders 1987-93. Note that this exhaust is non-catalyitic converter style. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!
£205.00 -
EX034 EXHAUST FITTING KIT
A useful kit containing all the items you would normally need to fit a standard exhaust onto a 105 Series car. See also EX036 for the metal plates and inserts for the rubber hangers.
£18.50 -
EX021 EXHAUST MANIFOLD NUT
Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have more access room around the nut.
£0.95 -
EX020 EXHAUST/INLET MANIFOLD STUD
Exhaust/inlet manifold stud 34mm to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not currently available. Please measure your existing inlet studs...
£1.25 -
EX033/1 FRONT EXHAUST SECTION WITH CATALYTIC C…
Front exhaust section with catalytic convertor to suit Bosch fuel injected Series 4 Spiders 1993. Please note, this exhaust section comes complete with gaskets, see second picture. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!
£385.00 -
EX019/1 CYLINDER HEAD TO EXHAUST MANIFOLD GASK…
Composite cylinder head to exhaust manifold gasket to suit 75 twin spark engine.
£2.50 -
EX033 FRONT & MIDDLE EXHAUST SECTION - INJECTI…
Front & middle exhaust section to suit Bosch fuel injected Series 3 and all Series 4 Spiders 1986 to 1993. Will also fit Series 4 (1600 carburettor) cars with a injection manifold (115.88.01.705/6.00). For 71-86 carburettor cars see item code EX008. Made...
£180.00 -
EX022 EXHAUST MANIFOLD TO DOWNPIPE GASKET
Copper exhaust manifold to downpipe gasket to suit all European specification exhaust systems on 105/115 and 106 series cars. Note some US specification cars have a different style 'one piece' gasket which we can get to special order. Please enquire in...
£1.50 -
EX019 CYLINDER HEAD TO EXHAUST MANIFOLD GASKET
Copper cylinder head to exhaust manifold gasket to suit all 101 and 105 series engines plus 4 cylinder 116 models and 4 cylinder 75 engines (not TS).
£1.50 -
EX009 MIDDLE EXHAUST SECTION - SPIDER 1971-86 …
Repalcement middle exhaust section to suit all Spiders 1971-86 for cars without a catalytic convertor and fitted with carburettors. Note that this will also suit late Series 3 Spiders with carburettors up to 1990. Made in Italy by IMASAF - OE...
£60.00 -
EX024 RUBBER HANGER FOR EXHAUST SYSTEM
Rubber hanger for the exhaust system on all 105/115 series cars. Normally two per car. Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars. Note. Metal plates and inserts for the rubber hangers are available under item code EX036.
£2.50 -
EX036 SET OF METAL PLATES AND INSERT FOR RUBBE…
Set of 2 metal plates and the insert for the bolt hole on the rubber exhaust hanger on all 105/115 series cars. Two sets are required for each hanger, usually 4 per car (2 rubber hangers). Also fitted to 750, 101, 102 (2000) and 106 (2600) Series cars...
£7.00 -
EX023 EXHAUST TAILPIPE O RING
Exhaust tailpipe o-ring for the joint between the centre and rear sections of the exhaust on all 105 series cars
£3.00 -
EX060 BRACKET GEARBOX - EXHAUST STANDING PEDAL…
Bracket gearbox - exhaust. For 105 series cars with standing pedals. Length 38mm.
£44.50 -
EX059 BRACKET GEARBOX - EXHAUST HANGING PEDALS
Bracket gearbox - exhaust. For 105 series cars with hanging pedals. Length 32cm.
£44.00 -
EX058 BRACKET GEARBOX - EXHAUST UPPER
Bracket gearbox - exhaust. For 105 series cars.
£28.50 -
EX017 REAR EXHAUST SECTION - SPIDER 1983-93
Rear exhaust pipe section to suit Series 3 and Series 4 Spiders from 1983-93. Has the correct style 'straight' chromed tip as per original. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!
£65.00 -
EX016 REAR EXHAUST SECTION - SPIDER 1971-83
Rear exhaust pipe section to suit all Kamm-Tail/Series 2 Spiders from 1970-83 with the correct 'down turned' style chrome tip. Also used on 1600 Junior Zagato. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!
£55.00 -
EX015 REAR EXHAUST SECTION - ROUNDTAIL SPIDER …
Rear exhaust pipe section to suit all Roundtail Spiders 1966-70 with the correct style angled cut-off. Please note, our rear exhaust section is specific to the Spider Roundtail. We have noticed some suppliers will offer a rear exhaust section from...
£67.00 -
EX025 BUSH - GEARBOX/EXHAUST HANGER
Bush for the gearbox/exhaust hanger bracket that bolts to the gearbox or transaxle on 105, 116 and 75 models. 2 required per car on 105 models and 1 per car on 116 and 75 models.
£4.00 -
EX018 REAR EXHAUST SECTION - NO SILENCER - SPI…
Rear exhaust pipe section to suit Series 3 and Series 4 Spiders from 1983-93. This version is without a silencer for a more sporting exhaust note! Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954!
£65.00