105 SPIDER PARTS : BRAKES

Brass female brake union - 7/16 BSF thread - suitable for the early style brake fluid reservoir on 105 series cars BR069

Non-return valve for the servo as fitted to cars with hamging pedals.

Full set of Brembo brake discs, new calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. We normally stock Brembo brake discs but kits may vary according to supply. Please note, these discs...

Full set of brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. Rear discs will normally be Brembo but the 1300/1600 fronts have been unavailable from Brembo...

Full set of drilled + grooved sport brake discs, new calipers (no exchange required), pad pin set, Ferodo DS2500 fast road / track day pads and a set of Goodridge braided hoses (which carry a lifetime warranty). Front discs include new wheel studs...

Full set of drilled + grooved sport brake discs, new ATE fitment calipers (no exchange required), pad pin set, Ferodo DS2500 fast road / track day pads and a set of Goodridge braided hoses (which carry a lifetime warranty). Front discs include new wheel...

Big brake conversion kit for 1300/1600 cars (cars fitted with ATE 76mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Big brake conversion kit for 1750/2000 cars (cars fitted with 89mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Big brake conversion caliper seal kit. Suitable for kits BR200 & BR201. This kit only does one caliper. 

Set of high performance Ferodo DS2500 brake pads to suit the Big Brake conversion kits available under item codes BR200 (1750/2000 cars) and BR201 (1300/1600 cars) For the race version in DS3000 please go to the Race / Performance parts section of the...

Keeping your brakes and calipers well-lubricated allows them to operate at peak performance for a smooth ride that is free from excess Noise, Vibration and Harshness. Apec brake grease is formulated from a copper-free lubricant that assists in the...

  ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder paste...

The main handbrake cable from the handle to the pivot on the differential to fit all Spiders with ATE brakes 1967 to 1993. Also fits Junior Zagato.

Set of Ferodo rear brake pads to fit all ATE braked 105 Series cars.

Set of front brake pads to fit all ATE braked 1300 and 1600 cc cars with the smaller front brake calipers plus some 116 models of any engine size. See BR021 for the equivalent part for cars with larger (1750/2000) brake calipers. Note that most 1.6...

Set of Ferodo front brake pads to fit the larger ATE brake calipers used on 1750 & 2000 engined cars and Montreals. Also used on 1.6 Spider from 1985 onwards.

Set of front brake pads from high quality manufacturer TRW to suit 1750/2000 105 series models and Montreals. Believed to be a superior pad on cars where it has been difficult to eliminate pad squeal.

Set of rear brake pads to suit cars with Dunlop braking systems. 

Brake pad retaining pin/spring set to fit the rear brake calipers on all ATE braked 105 Series cars. Kit is for both rear calipers.

Brake pad retaining pin/spring set to fit all 1750 and 2000 models with the larger ATE front brake calipers. Kit is for both front calipers.

Brake pad retaining pin/spring set for 1300/1600 model front ATE brakes on 105 series cars plus some 116 models of all engine sizes. Kit is for both front calipers.

Ferodo DS2500 - fast road/track day rear pads. For the race version in DS3000 please go to the Race / Performance parts section of the website.   Height - 53mm   Width - 55mm   Mounting holes center to center - 36mm  

Set of Ferodo DS2500 front brake pads to suit small front calipers  fitted to 105 1300 & 1600 cars plus some 116 models of any engine size. Ideal for fast road/track day cars. For the race version in DS3000 please go to the Race / Performance parts...

Set of Ferodo DS2500 front brake pads for large ATE calipers (1750/2000 style). Excellent for fast road and track day use. For the race version in DS3000 please go to the Race / Performance parts section of the website. Height - 70mm Width - 76mm...