CLEARANCE

Cloverleaf metal keyring. These keyrings are brand new we just don't usually sell this production.

Stainless steel outer headlight ring to fit non-stepfront GTVs and GT Juniors, as well as 1750 Berlinas. ** NOTE ** - This part does not have the 'cutout' to suit cars with the small headlight height adjustor levers on the bottom of the...

Brake master cylinder heat shield to suit all 750/101 Spiders. This shield was fitted and removed so has some small marks but is otherwise new.

Black vinyl seat back cover. Suits all Kammtail Spiders 1971-78 including 1750 and Spider Junior models as well as the 2000 version. Beautifully made in the correct style and material. This seat cover is brand new. We just usually sell it as a set...

Original style carpet set to suit Roundtail Spiders 1966-69. Covers the transmission tunnel/handbrake area and gear lever surround. This carpet set is brand new. It is just not the production we usually sell.

Complete Altissimo rear light unit to suit 2000 GTV and late GT Juniors. Right side when viewed from the rear of the car. This light unit is brand new. It does however have some missing and flaking chrome finish along the edge as can be seen...

Brake fluid reservoir for left hand drive 105 series cars from 1970 with hanging pedals. Also fits some 116 models. 3 cap version. Also suitable for LHD Montreals. This brake fluid reservoir is brand new. It just has a crack in one of the outer...

Right rear wing/fender 'number 3' repair section to fit all GT/GTV models 1964-76. Covers the section in front of the right rear wheel of the car.This repair section is brand new, it just has a very small dent as can be seen circled in the photos.

Suits all roundtail and Series 2 Kammtail Spiders. Includes the Carello logo moulded into the cover. Left side only

Outer door handle to suit all GTs, GTVs, GTCs & GTAs 1964-77 - right side. Made from the original tooling. This handle is brand new, it is just missing its corresponding keys.

In tank fuel lift pump to suit Bosch fuel injected Spiders 1983-93 and fuel injected 75 models (TS and V6). If you require the junction hose between the fuel sender and electric pump, please select following link FL121 CONNECTING HOSE IN TANK FUEL...

Heater facia panel to suit all 1st series/stepfront 105 GTs. Comes with the mounting rivets and clips! This panel is brand new, however it is missing some of the chrome backing from the manufacturing process. All of this can be seen circled in the...

Left side of right seat, runner support bracket for the 101 Spider. This bracket is brand new, we just usually sell both sides as a set.

Cosworth race piston to suit 2000 cars. This piston is brand new however we only have one in stock. 84.5mm bore. 10.7:1 with a 112mm head.

Special Classic Alfa production GTA 7x14" replica alloy wheel, ET29 finished in "magnesium look". We have made a limited number of our GTA wheels with a bare alloy finish which we have then put through a special process to get a...

GT front wing right - highest quality reproduction panel available - this panel is for later cars - 1750GTV, 2000GTV & late GT Juniors. This wing is brand new it just has 2 very small dents as circled in the photos, that will want some...

Plastic "Spider" script for rear of Series 4 Spider 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car. This badge has snapped in two however...

Front valance for 2000GTV and late GT junior 1973-77. This panel is brand new, it just has a very small dent from shipping to the underside of one of the headlight cutouts. Please see circled in the photos.

Pertronix electronic ignition kit - for later cars to replace 1 piece Bosch points, delivers twice the power to the spark plugs, reliable starting every time! Uses Hall effect magnetic sensor in place of the points and unlike optical systems it isn't...

Beautifully made rear seat cover trim set to suit the rear seat of 1750 GTV Mk 2 models. This version is done in early Cinghiale brown vinyl as found in the earlier Mk 1 1750's. This is not the factory original style but is still a beautifully made piece.

Enamel/metal serpent C pillar badge to fit Giulia Saloons. Dimensions: Height - 55mm Width - 41mm Thickness - 2mm This badge is brand new, it is just a slightly different shade of green to the normal ones we sell, with more of a matte finish to the...

Upper rear panel for all Series 4 1990-93. Covers the area from the bumper up to the bootlid, including the rear lights. Pressed from original Pininfarina tooling. This panel is brand new it just has a small dent on the upper lip that will need fettling...

Left side 'hook end' style wiper arm to fit Step-front GTs, Roundtail Spiders and early Giulia Supers. This arm is brand new. We just usually sell these in pairs.

Complete Altissimo style sidelight indicator unit to fit the right side of a Giulia Super or Ti with the two piece amber/clear lens and the chrome metal divider. This unit is brand new and in perfect condition.