The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Oil filler cap - metal bayonet style as fitted to most Nord twin-cam engines.
Black plastic style bayonet fixing Olio cap Fits late 105 spiders plus GTV6 and 75. (note original caps with the cross and serpent logo currently unavailable)
Aluminium spin/screw on fuel filler cap to suit all 2000 GTVs and Spiders. 50mm ID
Spin/screw on fuel filler cap to suit late Series 3 and all Series 4 Spiders. Suits 58mm (approx) diameter filler necks.
Oil filler plug to fit the gearbox and differential on 750, 101 and 105 Series cars. Will also fit Montreal differentials. Uses 14mm Allen key/wrench.
Oil filler cap seal
Later style valve/cam cover hold down bolt with the large flats suitable for use with a 17mm spanner. Fits 4 cyl 105, 116 and 75 engines.
GTA style oil filler cap with inbuilt breather outlet suitable for venting to an oil catch tank.
Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101, 105 and 116 series engines. The same washers are also used on Montreal engines - please enquire in...
Chromed bolt suitable for holding down the cam cover on all twin-cam 101 and 105 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car.
Here is a diagram showing the location of some of the parts in this category.
Square style radiator cap to suit 1750 models from 1968 onwards and all cars from 1970 onwards. Pressure rated to 0.7 bar - 10 psi.
Valve/Cam cover gasket to fit all 105 Series single plug engines with silicon beading to improve sealing. For engines without bolts at the front of the cam cover please see EN110/1.
Bolt for holding down the cam cover on all twin-cam 101, 105 and also 106 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car.