GB011 LAYSHAFT REAR BEARING - HYDRAULIC CLUTCH GEARBOXES

Layshaft rear bearing to suit mechanical clutch 105 series cars. Also fits 5 speed 101 series, late 102 series and all 2600 (106 series). Outer diameter - 62mm Inner diameter - 30mm Thickness -...

Mainshaft front bearing to suit hydraulic clutch gearboxes. Inside diameter 30mm, outside diameter 62mm, width 23.8mm.

Gearbox layshaft and mainshaft end 'stake' nut to fit gearboxes used from 1972 onwards. Due to gearbox interchangeability, you will need to check if your gearbox has a stake nut like this or a...

Layshaft middle bearing for 101 and 105 series gearboxes Also fits late 102 series and all 2600 (106 series).

Layshaft front bearing (internal diameter 20 mm, OD 52 mm, width 22.2mm) to suit gearboxes with hydraulic clutches. Some early hydraulic clutch gearboxes use GB007 so please measure before...

Gearbox mainshaft rear bearing to suit hydraulic clutch gearboxes. Inside diameter 25mm, outside diameter 52mm, width 15mm.

Layshaft front bearing (25mm inside diameter, OD 52mm, width 20.6mm) to suit mechanical clutch and some early hydraulic 105 series gearboxes. Also fits 101 series, late 102 series and all 2600...

Gearbox bellhousing with exposed gear selector rods. Suitable for all 105 cars with hydraulic clutch.

Front gearbox to bellhousing oil seal - to fit cars with hydraulic clutches.