Differential pinion outer (front) bearing to fit the smaller pinion shaft found in 1300-1750cc engined cars, also fits some late 101 series cars.
If you have a 101 Series car please measure your bearings and compare between this bearing and 750-417.
Dimensions:
Differential pinion inner (rear) bearing to suit the smaller pinion shaft found on 1300-1750cc cars. Also fits some late 101 series cars. If you have a 101 Series car please measure your bearings...
Differential front pinion oil seal to suit 1300, 1600 and 1750 cars with smaller diameter pinions. Inside diameter 40mm, OD 72mm, width 10mm. Also fits 750 101 Series axles. See GB035 for cars...
Differential shoulder/halfshaft inner bearing to suit the smaller diameter halfshafts on standard 1300-1750cc cars. Internal diameter 38mm, OD,76mm, width 21 mm. Also used on 1600cc engined...
Differential pinion outer (front) bearing to fit all 750 series cars as well as some early 101 series cars. High quality bearing. If you have a 101 Series car please measure your bearings and...
Tab washer, differential pinion nut. 1300-1750 axles.
Differential pinion nut to fit all 105 Series 1300 to 1750 differentials as well as all 101 Series differentials/rear axles
Differential pinion outer (front) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 33.3mm, OD 68.26mm, width 22.2mm.
Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts...
AUTODELTA STYLE oil pan, for 1300,1600 1750 rear diffs. Increases the oil volume by more than double!Due to the larger oil capacity and the large cooling fins, the oil in the differential does...