SU064 REAR SUSPENSION TRAILING ARM - FRONT BUSH - HEAVY DUTY

Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Diameter - 44mm (approximately) Standard version of...

Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Diameter - 50mm (approximately) For earlier (pre 1968) cars...

Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Diameter - 44mm (approximately) See item code SU062 for an...

Standard rear suspension trailing arm bush to fit pre-1968 cars which use a smaller bush on the arm to body joint. Bush approx 36mm diameter.

Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair...

Rear suspension trailing arm to fit all 105 Series cars 1967 onwards.

Superflex rear trailing arm bush - fits into front mounting connected to the body. Suitable for track day and competition use. Two bushes required per car, sold as a pair.

Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body /...

Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...