The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
750-550 REAR SUSPENSION TRAILING ARM POLY BUSH KIT - 34mm
¥20,559.11
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body / floorpan end of the trailing arms (the front). They are not needed on the rear of the trailing arm. Also used on some early 102 Series 2000 and 106 Series 2600 models. Please check carefully. Mildy uprated (75 Shore) from the standard Alfa bush for improved rear axle location without loss of ride comfort, these bushes are ideal for road or competition use - being only 34mm diameter there is no need to make the bush significantly harder. These bushes are also far easier to install than the original item due to their split design. For the 52mm version of this bush to fit the later trailing arms see item code 101-550.
Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Approx 44mm diameter. See item code SU062 for an uprated version...
Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Approx 50mm diameter. For earlier (pre 1968) cars with smaller...
Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair...
34mm diameter rear suspension trailing arm bush to suit 750 Series cars. 4 required per car. Also fits the rear suspension of some 102 Series models and some 106 Series 2600 cars and on the...