Categories

Montreal bottom hose from oil dry sump tank to block. 

Cupro-nickel short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. If you require copper see BR070.

Dashboard stainless trim kit. To suit left hand drive 101 Series Spiders.  

Plastic cast reproduction of the C pillar mounts for the Bollino D'Oro (sold separately under code BG042). Sold as a pair. To be painted in the body colour of the car.

Pedal box rubber seal, fits all 750 and 101 cars. Fits around the floor aperture, used with 750-184.

Pedal box spacer plate, all 750 and 101 cars. Stainless steel, includes fitting bolts.  The master cylinder is hardly in an ideal position right next to the exhaust down-pipes or manifold, even if a heat shield is fitted. Installed inside the car between...

Clevis pin for all clutch master cylinders from 1963-93. Diameter: 7.8mm Length: 24mm

Rebound straps mounting plate. 105 Series cars. 

Silver badge normally found on the Kammtail ashtray. Will fit left or right. Will also fit some radio blanking covers. Diameter - 32mm

Cylinder head nut washer to fit 1750/2000 engines. Dimensions: Outer diameter - 24mm Inner diameter - 13mm Thickness - 2.9mm

Steering box fluid, suitable for both Burman and ZF steering boxes. Ready to use, 500ml. One bottle is sufficient for one steering box.

Coolant drain tap. Fitted on early cars.  

Engine cooing system thermostat housing. To fit most 105 Series cars from 1968-83 plus some 116 models. As the intake manifolds are interchangeable, these are often found on earlier cars as well, so please check that your car has the relevant style of...

Ashtray fitted to 101 1600 Spider, GTA and GT Juniors.  Beautiful quality.

Yellow bulb for the front fog lights, fitted to 102 Series 2000 and 106 Series 2600 Touring bodied Spiders. Only limited stocks available.

Beautifully made inner door trim panel to suit Series 4 and some late 3 Spiders from 1989-93. Done in the correct style and skai black material and includes the heat pressed trim lines as well. Please note - all door trim panels are only available as a...

Beautifully made inner door trim panel to suit Series 4 and some late 3 Spiders from 1989-93. Done in the correct style and skai tan/beige material and includes the heat pressed trim lines as well. Please note - all door trim panels are only available as...

Rotor arm to suit the late Series 4 Spider 1990-93. Also fits some 1988-89 Series 3 cars. Same as IG035 but genuine Bosch.

Early wheel brace for cars from 1955-1972 with 22mm wheel nuts. Features a flat on the other end for removing hubcaps. The tool kit TOOL010 comes with a 19mm wheel brace for 2000 and late 1600 cars (1972-1978). If you have an earlier car you need to buy...

Differential pinion nut tool, 2000 type axles. ++ This tool is not suitable for use with an impact wrench/gun ++ Outside Diameter: 40mm 

Differential pinion nut tool, 1300-1750 type axles, including 750 and 101 series. ++ This tool is not suitable for use with an impact wrench/gun ++

Cylinder head flange nut for early 750 & 101 series cars. Also occasionaly found on some early 105 cars.

Spin on oil filter conversion kit, for use on 750,101 and 105 series cars with 1300,1600 and 1750 engines. Will require oil filter EN046.

Boot mat to suit all 102 Series 2000 and 106 Series 2600 Sprints. Beautifully made.