EN083 VALVE SHIM 9mm SELECT SIZE FROM DROP-DOWN MENU

Valve shim to fit GTA, 750 Giulietta and 75 Twin Spark engines. They are available in increments of .025mm from 1.500 (.059") to 3.500 mm (.138"). Please select size from the...

OE quality valve guide stem seal - to fit the inlet valve guide on all 101, 105, 116 and 75 engines (including V6) with 9mm valves and valve guide stem seals. Goetze brand or similar. Also...

Original equipment Reinz head gasket, including the 6 oil 'o-rings'. Fits all 105 series engines, as well as 1300 or 1600 101 series engines of the same capacity. Please select your engine size...

Complete Spesso brand engine gasket set, plus original equipment Reinz head gasket. For 105 series engines plus 116 and 75 engines (excluding TS and V6). Please select engine...

Later style valve/cam cover hold down bolt with the large flats suitable for use with a 17mm spanner. Fits 4 cyl 105, 116 and 75 engines.

Spesso brand engine gasket set for 4 cylinder 105 and 116 series models plus 75's (excluding V6 and TS) Please select engine size from dropdown menu below. ** NOTE ** - Does not...

Zinc finished bolt. For holding down the cam cover on all twin-cam 101 and 105 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car.

Chromed bolt suitable for holding down the cam cover on all twin-cam 101 and 105 series cars. In the original style with the serrated edge and large allen key socket. 6 bolts per car.

Used valve spring shim to suit 105/115 Series cars. (approximately 0.5mm). These shims sit inside the spring cup, under the valve spring. These valve shims are used but are in fully usable condition...