11.6mm lift hollow billet lightweight camshaft with 284 degrees duration at 0.30mm tappet clearance (253 deg. at 1mm lift). Designed by leading UK Alfa competition engine builder Jim Evans, whose experience and knowledge is second to none, this is an excellent inlet or exhaust cam for race / trackday 1600/1750/2000 engines. Combine with camshaft EN521 on the exhaust or another EN522 for a great combination, particularly good on 1750 engines. The advantage of this cam is that it can be used with standard piston cutaways. As with all camshafts with lift greater than 11.4mm it will usually be necessary to modify the cam follower housing to fit this camshaft. Made in EU by very well respected camshaft manufacturer who supply many leading European race preparation companies. Price is per camshaft. Please note that with all performance camshafts (with a lift of more than 10.8mm) it may be necessary to make a simple modification to the shape of the cylinder head around the camshaft follower to allow the camshaft lobe to turn freely. This is particularly an issue with early (pre-1972) heads.
EN521 11.2mm PERFORMANCE CAMSHAFT
11.2mm lift hollow billet lightweight camshaft with 284 degrees duration at 0.30mm tappet clearance (253 deg. at 1mm lift). Designed by leading UK Alfa competition...
¥51,467.27
EN523 10.8mm PERFORMANCE CAMSHAFT
10.8mm lift hollow billet lightweight camshaft with 285 degrees duration at 0.30mm tappet clearance (254 deg. at 1mm lift). Designed by leading UK Alfa competition...
¥51,467.27
EN529 13mm 307 DEGREES HIGH PERFORMANCE CAMSHA…
13mm lift, 307 degrees duration. Hollow billet lighweight camshaft designed by CatCams in Holland, suitable for 2 litre Nord engines wanting lots of power. Please note that with these performance...
¥51,467.27
EN524 12mm RACE CAMSHAFT
12mm lift hollow billet lightweight full race camshaft with 296 degrees duration at 0.30mm tappet clearance (264 degrees at 1mm lift). Designed by leading UK Alfa...
¥51,467.27
EN079 CAMSHAFT TAB WASHER
Camshaft to chain sprocket tab washer. Two required per engine. We recommend you replace any tab washer once it has been used more than once.
¥388.43
80542 USED 2600 CAMSHAFT
Used camshaft to suit 2600 cars. In good condition with just minimal surface corrosion that could easily be cleaned up. This cam will however need a regrind as some of the lobes are "pointy"
¥23,305.93
D0197 CAMSHAFT LEFT 2.5 V6
Left camshaft for 2.5 V6 models.
¥38,843.22
EN079/1 CAMSHAFT SPROCKET BOLT
Camshaft sprocket bolt. Two required per engine. If you require the nut please see EN079/2
¥349.59
80310 USED 2600 CAMSHAFTS - PAIR
Used pair of inlet and exhaust camshafts to suit 2600 cars. Both are in good condition with just minimal surface corrosion that could easily be cleaned up. We would be willing to sell these...
¥46,708.97