13mm lift, 307 degrees duration. Hollow billet lighweight camshaft designed by CatCams in Holland, suitable for 2 litre Nord engines wanting lots of power. Please note that with these performance camshafts it will be necessary to make a simple modification to the shape of the cylinder head around the camshaft follower to allow the camshaft lobe to turn freely.
EN522 11.6mm PERFORMANCE CAMSHAFT
11.6mm lift hollow billet lightweight camshaft with 284 degrees duration at 0.30mm tappet clearance (253 deg. at 1mm lift). Designed by leading UK Alfa competition...
€316.68
EN521 11.2mm PERFORMANCE CAMSHAFT
11.2mm lift hollow billet lightweight camshaft with 284 degrees duration at 0.30mm tappet clearance (253 deg. at 1mm lift). Designed by leading UK Alfa competition...
€316.68
EN523 10.8mm PERFORMANCE CAMSHAFT
10.8mm lift hollow billet lightweight camshaft with 285 degrees duration at 0.30mm tappet clearance (254 deg. at 1mm lift). Designed by leading UK Alfa competition...
€316.68
750-307 GIULIETTA SPIDER HARDTOP HOOKS - PAIR
Pair of 750 & 101 Series Spider hardtop hooks. Suitable for all 1300 Giulietta.
€89.63
EN079 CAMSHAFT TAB WASHER
Camshaft to chain sprocket tab washer. Two required per engine. We recommend you replace any tab washer once it has been used more than once.
€2.39
80542 USED 2600 CAMSHAFT
Used camshaft to suit 2600 cars. In good condition with just minimal surface corrosion that could easily be cleaned up. This cam will however need a regrind as some of the lobes are "pointy"
€143.40
EN524 12mm RACE CAMSHAFT
12mm lift hollow billet lightweight full race camshaft with 296 degrees duration at 0.30mm tappet clearance (264 degrees at 1mm lift). Designed by leading UK Alfa...
€316.68
D0197 CAMSHAFT LEFT 2.5 V6
Left camshaft for 2.5 V6 models.
€239.00
EN079/1 CAMSHAFT SPROCKET BOLT
Camshaft sprocket bolt. Two required per engine. If you require the nut please see EN079/2
€2.15