1900-102 PARTS : OTHER BRAKE PARTS

Set of 4 rear brake shoe springs to suit second series 1900 cars as well as 106 and 102 cars. Please compare what you currently have against the photos, as we believe there were some variations over the years.

Set of 4 front brake shoe springs to suit second series 1900 cars as well as 106 and 102 cars. Please compare what you currently have against the photos, as we believe there were some variations over the years.

 Give Your brakes the highest possible guarantee with the NEW Brembo B-Quiet lubricant. B-Quiet is a new Brembo lubricant which provides long term high load capacity and reliability for your braking system.The brake lubricant should be applied where the...

  ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder paste...

Rear brake flexi hose to suit 1900, 2000 (102 Series) and 2600 (106 Series) cars.

Front brake flexi hose to suit 1900 & 2000 (102 Series) cars.

Replacement rear wheel brake cylinder 1'' to suit 1900/102 series cars. Also fits 106 series cars fitted with drum brakes all round. Right hand side, see part number 1900/102-207 for right hand side.

Replacement rear wheel brake cylinder 1'' to suit 1900/102 series cars. Also fits 106 series cars fitted with drum brakes all round. Left hand side, see part number 1900/102-208 for right hand side.

Front brake cylinder repair kit to fit 1 1/4" brake cylinders usually fitted to Series 1 1900 models with small front drums. The kit does both front wheels.

Front wheel brake cylinder reapir kit to fit the 1 1/8 inch front wheel cylinders (both front wheels) on 2000 and 1900 Series 2 models with front drum brakes. Also fits the rear drums on 102 series cars and some 1900 models.

Bracket which is bolted to pedal box casting, where the heat protection plate fixes on to it, protects the Brake master cylinder from heat generated by the exhaust system. 

Spring for brake pedal, to ft in the pedal box. Suitable for 750 & 101 cars. 

Repair kit to suit a 1 inch diameter Girling Brake Master cylinder as fitted to all 750 Series and early 101 Series (drum braked) cars as well as 1900 models, 102 Series 2000 cars and drum braked 106 Series 2600. Contains the rubber seals and dust boot.

1" brake master cylinder to suit all 750 Series and 101 Series cars with front drum brakes. Please note – This cylinder was made for Giulietta 750/101 cars which use a union connection. To use this master cylinder on cars with a banjo connection (1900,...

Combined brake and clutch fuild cannister/reservoir to suit 102 Series 2000 cars. Dual outlet, with Girling sticker.

FISPA oil filter decal  for 750 Series, 101 Series, 102 Series (2000) Series cars. 

Yellow AGIP/SHELL decal to suit the brake fluid reservoir on later 750 Series, 101 Series, 102 Series (2000) and 106 (2600) series cars.  See code 750-299 for reservoirs to match and 750-298/1 for the Girling Decal to go onto earlier 750 Series cars.  

Brake union 5 way to suit all 105 series cars with standing pedals. This is normally fitted on the Bulkhead/Firewall in the engine bay.

BOSCH Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 & 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Fantastic tool for straightening new brake lines to fit onto all Alfas - as well as other lesser marques. Allows you to create dead straight pipe runs for a factory finish look. For 3/16" pipe. Other versions available to order. To see how it works -...

Useful tool for bending new brake lines to fit onto all Alfas - as well as other lesser marques.  

Brembo DOT 4 brake and clutch hydraulic fluid. 0.5 (500ml) litre container.

Brembo DOT 4 brake and clutch hydraulic fluid. 1 litre container.