750-101 SPRINT SS Ti PARTS : BRAKES

Front Disc Brake Conversion 750/101 Cars One of the vintage aspects of driving a Giulietta or 101 Giulia are the brakes. They are fine for normal driving, but can be a bit too exciting if you really need to stop fast. If you like to drive your Alfa, our...

We can offer a brake shoe relining/refurbishment service. Costs are  £100 for a 4-shoe set up and £150 for a 6-shoe set up. for standard road use. We can also offer a fast road or race compound for an extra charge.  Customer must send their own shoes to...

 Give Your brakes the highest possible guarantee with the NEW Brembo B-Quiet lubricant. B-Quiet is a new Brembo lubricant which provides long term high load capacity and reliability for your braking system.The brake lubricant should be applied where the...

  ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder paste...

Set of front brake pads for girling disc braked late 101 series cars as well as 106 series 2600 cars.

High performance competition Ferodo DS3000 brake pads to fit Girling front disc braked 101 Series cars as well as 106 Series 2600 cars. Suitable for racing use only. For fast road/track day applications see the DS2500 version under product code 101-030/1

Uprated Ferodo DS2500 brake pads to fit Girling front disc braked 101 Series cars as well as 106 Series 2600 cars. Suitable for fast road/track day use.  For the DS3000 version suitable for racing cars, see product code 101-030/2.

Brake pad pin/spring set to fit the Girling front disc brakes on 101 Series Giulias and 106 Series 2600 cars.

Front brake disc to suit later 101 Series cars - including SS and SZ. Only currently available as a pair, please select 2 as the order quantity.

Rebuild kit to suit a pair of front brake calipers as fitted to disc braked 101 Series cars. One kit does both calipers.

Goodridge braided brake line set (complete car set – 3 pieces). These stainless steel brake flexi hoses will improve the pedal feel and are guaranteed for life. This version is approved by the German TUV authorities and therefore suitable for the...

Brake flexi hose for the rear of all 105 series cars including Montreals, as well as 750 and 101 Series cars. Goes from the body to the rear axle. ONE PER CAR! Will also fit the hydraulic clutch hose on 2600 (106) cars.

Brake flexi hose to fit the front brake system (between brake lines and calipers/drums) on all 105 Series cars including Montreals, as well as 750, 101 and 106 (2600) Series cars.

Pedal box rubber seal, fits all 750 and 101 cars. Fits around the floor aperture, used with 750-184.

Pedal box spacer plate, all 750 and 101 cars. Stainless steel, includes fitting bolts.  The master cylinder is hardly in an ideal position right next to the exhaust down-pipes or manifold, even if a heat shield is fitted. Installed inside the car between...

Right hand front wheel brake cylinder for 2 shoe front brake systems on 750 and early 101 Series cars. Note that there are two cylinders in each front brake and that the cylinders are different left to right- left available under 750-014/1. 

Giulietta front brake wheel cylinder repair kit to suit 2 shoe 1 inch diameter Girling brake systems. 1 kit does both front wheel cylinders.  

Left hand front wheel brake cylinder for 2 shoe front brake systems on 750 and early 101 Series cars. Note that there are two cylinders in each front brake and that the cylinders are different left to right- right available under 750-014/1. 

Front brake cylinder seal kit to suit 101 series cars with 3 shoe front brakes. One set does both front brakes.

Bleed screw cap. Will fit all bleed screws.  

Brake disc/drum retaining screw.

Pair of front wheel brake cylinders (3 shoe 101.20.22.040/41.00) to suit 3 shoe 101 Series drum braked cars. Please note, one pair will cover a right and left, as they are sided.

Brake master cylinder seal kit to suit 3/4" (19mm) master cylinders as fitted to 101 Series cars with front disc brakes.

New production of the brake master cylinder (3/4 inch bore) to fit Giulia 101 Series cars with front disc brakes.