GTA RACE & PERFORMANCE PARTS : ENGINE BLOCK

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

Standard 2000 piston liner set to suit 8 valve twin spark engines as found in Alfa 75s and 164s.

Set of original 2000 high compression (10.4:1) pistons & liners. Set includes Goetze piston rings, gudgeon pins and circlips. Will fit 105 / 116 series engines (Not TS). Can be purchased individually if required - please email. Be aware these are the...

2000 high compression (approx 10.4:1) piston + liner set (includes rings and gudgeon pins). Great for mildly tuned 2.0 litre engines. Not TS. We have sold this brand of pistons for the past 4 years and the quality is very good. We have also got them in...

  1600 COSWORTH FORGED RACE PISTON - 78.75mm bore (giving a race legal 1598cc). New design by leading UK Alfa competition engine builder Jim Evans, available only from Classic Alfa. Suitable for all performance 1600 engines including GTA. Small end width...

2000 COSWORTH FORGED RACE PISTON - 84.5mm bore. New design from leading UK Alfa competition engine builder Jim Evans, available only from Classic Alfa. Suitable for all performance 2000 engines & (with a suitable cylinder head) will provide up...

`+020 con rod/big end bearings to suit 1600, 1750 and 2000 101, 105, 116 and 75 engines, including TS. Produced by an original equipment manufacturer such as Mahle or Vandervell and therefore favoured by performance engine builders. 

`+010 con rod/big end bearings to suit 1600, 1750 and 2000 101, 105, 116 and 75 engines, including TS. Produced by an original equipment manufacturer such as Mahle or Vandervell and therefore favoured by performance engine builders. 

Main crankshaft bearings to suit all 1300 to 2000 101, 105, 116 and 75 engines. Produced by an original equipment manufacturer such as Mahle or AE Borgo, original suppliers to Alfa Romeo, and favoured by performance engine builders. 

Main crankshaft bearings to suit all 1300 to 2000 101, 105, 116 and 75 engines. Produced by an original equipment manufacturer such as Mahle or AE Borgo, original suppliers to Alfa Romeo, and favoured by performance engine builders. 

Standard con rod/big end bearings to suit 1600, 1750 and 2000 101, 105, 116 and 75 engines, including TS. Produced by an original equipment manufacturer such as Mahle or Vandervell and therefore favoured by performance engine builders. 

New 2000cc cylinder liner that has been precision bored in a special jig to increase capacity to 84.5mm to suit our special high compression Cosworth race pistons - available separately under item code EN513. This bore gives you the maximum available...

New 1600cc cylinder liner that has been precision bored in a special jig to increase capacity to 78.75mm to suit our high-compression Cosworth race pistons - available separately under item code EN511. This bore gives you the maximum available cylinder...

Main crankshaft bearings to suit all 1300 to 2000 101, 105, 116 and 75 engines. Produced by an original equipment manufacturer such as Mahle or AE Borgo  original suppliers to Alfa Romeo, and favoured by performance engine builders. 

 Complete set of ACL or KING race quality STD conrod bearings. Due to supply being sporadic for these bearing, we will either supply ACL or the KING version. If you have a preference, please state this on the comments section when you place the order.  ...

Complete set of ACL or KING race quality conrod bearings +.010" oversize. Due to supply being sporadic for these bearing, we will either supply ACL or the KING version. If you have a preference, please state this on the comments section when you place...

 Complete set of ACL or KING race quality main bearings +.010" oversize. Due to supply being sporadic for these bearing, we will either supply ACL or the KING version. If you have a preference, please state this on the comments section when you place the...

 Complete set of ACL or KING race quality main bearings standard size. Due to supply being sporadic for these bearing, we will either supply ACL or the KING version. If you have a preference, please state this on the comments section when you place the...

Set of 4 Carrillo forged 'H' beam connecting rods to suit 1750 and 2000 engines. Widely regarded as the strongest rods on the market and perfect for competition applications where regulations allow them.

Forged steel race conrod for 1600 engines. FIA legal I section rod fitted with Aero bolts. Made in the UK by Arrow to the highest possible standard. Price is for a set of x 4 conrods. 

1600 GTA crankshaft - manufactured by Arrow precision, a leading UK crankshaft manufacturer with over 30 years experience in the Motorsport arena, including Formula 1, Le Mans, WRC and WTCC. They are manufactured to a specification that has been...

ARP Racing conrod bolts for 1750 & 2000 engines, including TS. Made in the USA to high specifications.

Standard timing chains can stretch and wear under high load, with a consequent affect on engine performance. German made Iwis competition timing chains are specially made with high wear resistant materials and coatings for longer life and improved...

Standard timing chains can stretch and wear under high load, with a consequent affect on engine performance. German made Iwis competition timing chains are specially made with high wear resistant materials and coatings for longer life and improved...