GTA RACE & PERFORMANCE PARTS : FILTERS

Blanking plate for use where you are using a GTA oil cap and therefore do not need the standard breather elbow.

Metal encased cartridge type oil filter and seals to suit 105, 750 and 101 series engines. This comes with both sealing rubber ring, which will suit all variants.

When you remove the standard air cleaner on carburettored Alfas you need to duct the vapour from the cam cover. K&N manufacture this oil breather catch filter specifically for this purpose. If you are not using an oil catch tank for competition purposes,...

Spin on oil filter conversion kit, for use on 750,101 and 105 series cars with 1300,1600 and 1750 engines. Will require oil filter EN046.

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...

Fixing tab rampipe 40 DCOE. 4 required per carburettor. 

Fixing tab rampipe 45 DCOE. 4 required per carburettor. 

Pair of 70mm mesh filters to fit over the Weber 48mm DCOE rampipes. Two pairs required per car.

Pipercross filter socks - set of 4 for those with GTA style intake trumpets fitted or similar rampipes.

Pipercross 40 DCOE rampipes set - sold as a set of 4 only. Will fit Weber, Dellorto and Solex carbs fitted to 105 series Alfas. Depth -30mm

Pair of Pipercross kk300 air filters - inc. mounting plates. No rampipes necessary. ** NOTE ** - the backplate may need some easy trimming to make it fit some engines.

Pipercross kk600 air filter - including mounting plate. Fixes directly over both carbs. Greatly improved induction, can be teamed with rampipes available under code FL045 for best effect. ** NOTE ** - This is not suitable for 1300 engines in...

Pair of K+N 'pancake style' performance air filters to suit all sidedraught twin carburettor Alfas. Chrome plated bodies and long-life filter elements and all fittings included. Not suitable for 1300 engines. 

Pair of 56mm mesh filters, to suit rampipes fitted to 40 DCOE carburettors. 

Pair of 63mm mesh filters to suit rampipes fitted to 45 DCOE weber carburettors. Will  fit on the rampipes supplied with new 45 DCOE carburettors. One set per carburettor.

Specially made venturi for our ram pipe FL067. It has a narrower outer diameter to allow the sleeve of the ram pipe to fit. 4 required per car.

Specially made spun aluminium rampipe to suit 40mm DCOE Weber carburettors that sleeve into the carburettor. Has a 63mm diameter bellmouth. Other depths available include 16mm, 39mm, 55mm and 75mm. You will need FL067/1 venturis for these to fit.

Specially made spun aluminium rampipe to suit 45mm DCOE Weber carburettors. Has a 70mm diameter bellmouth. Other depths available include 16mm, 26mm, 55mm and 75mm. Please enquire in need.

Specially made spun aluminium rampipe to suit 45mm DCOE Weber carburettors. Has a 70mm diameter bellmouth. Other depths available include 16mm, 39mm, 55mm and 75mm. Please enquire in need.