MONTREAL PARTS : COOLING

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

Montreal coolant hose set. NOT suitable for right hand drive cars.

'U' shaped coolant hose - goes between the cylinder heads on Montreal engines.

Montreal top radiator hose - from cylinder head to radiator. NOT suitable for right hand drive cars.

Fan belt for Montreal without power steering.

High quality water pump seal for Montreal.

Water pump gasket to fit all Montreal engines.

Water pump repair kit - now available with highest quality stainless steel components, top quality seals, bearing & gasket - upgrade and overhaul the weak link in your Montreal's engine once and for all! Kit contains 2 new bearings (which are sealed for...

Gasket to fit the thermostat housing with the 'drop in' style thermostat fitted to 105 Series cars from approx 1968 to 1982.

'Drop in' style engine cooling system thermostat to fit most 105 Series cars from 1968-83, all Montreals and some Alfetta models. As the intake manifolds are interchangeable, these are often found on earlier cars as well, so please check that your...

Water temperature warning switch - injection spider (and Alfetta engines). Screws into top of cylinder head behind back spark plug. Also can be fitted to Montreal radiators we believe.

Water temperature sender - screws into the inlet manifold on all 105 Series cars. Thread dimensions - M16x1.5

Red sticker for rad cap

Square style radiator cap to suit 1750 105-series models from 1968 onwards, all Montreals and most 105/115 series models from 1970 onwards. Also fits many 116 and 75 models. Pressure rated to 0.7 bar - 10 psi.

2 piece radiator mounting rubber. 4 required per car up to 1968, two required per car 1968 onwards.

Radiator overflow piping to suit all 105 series cars. Can also be used for cars with expansion tanks. Price is per metre of tubing.  

Later style heater valve that attaches direct to the heater matrix. Suitable for cars from about 1968 onwards (including Montreal), depending upon when the model changed over. This style valve has been available for many years in plastic but has now been...

Radiator fan switch for s4 spider and various 116 and 75 models that have electric cooling fans. Screws into rad. Can also be fitted in the top of the head at the back to run an electric fan in earlier carb-fed engines.   Will also fit Montreal. 

Heater matrix/core to suit all later style heaters from about 1968 onwards. See WA058/1 for (thicker) maxtrix for earlier style heaters. Note that the changeover year is only approximate as the heater design changed at different...

Small sized (13-20mm) stainless steel hose clamp/jubilee clip for general application on heater hoses etc.

Original style "Romablok" hose clamp 17-19mm.

Original style "Romablok" hose clamp 52-56.5mm.

Original style "Romablok" hose clamp 37-41.5mm.

Original style "Romablok" hose clamp 30mm.