750-101 SPRINT SS Ti PARTS : OTHER REAR SUSPENSION PARTS

Here is a diagram showing the location of some of the parts in this category.

Here is a diagram showing the location of some of the parts in this category.

Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body / floorpan end of the trailing arms (the front). They are not...

Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy uprated (75 Shore) from the standard Alfa bush for improved...

Classic Alfa production. Full set of uprated polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars. Stiffer (85 Shore) than the standard Alfa bush for improved rear axle location in high performance applications. As used...

Classic Alfa production. Polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original and are supplied with 4 metal spacers to prevent sideways...

Classic Alfa production. Uprated polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original and are supplied with 4 metal spacers to prevent any...

Rear A Arm ball joint cap. All 750 & 101 cars 

Classic Alfa strengthening kit for trailing arm to rear axle brackets to fit all 750 and 101 Series cars. This is an essential modification for anyone thinking of doing rally or race events in a Giulietta. The brackets on the rear axle tubes are not very...

Set of 4 metal & rubber rear suspension spring seats to suit 750 and 101 Series cars with the larger 115mm OD rear springs. See 750-097 for the same parts for the front suspension.  

Suspension rebound strap fitting kit. To suit all 750 & 101 Series cars. One kit does one strap. 

Original style canvas rear axle check strap to suit all 750 & 101 Series cars.

34mm diameter rear suspension trailing arm bush to suit 750 Series cars. 4 required per car. Also fits the rear suspension of some 102 Series models and some 106 Series 2600 cars and on the rear A arm of early 750 series cars. See 101-005 for the larger...

Nut & bolt for the rear A arm on all 750 & 101 cars.

52mm diameter rear suspension bush to fit the rear 'A-Arm' on all 750 and 101 Series cars, the trailing arms on later 101 Series cars as well as the trailing arms on some 102 Series 2000 and 106 series 2600 cars. See item code 750-016 for the smaller...

Kit containing the ball joint, upper and lower sockets, dust cover and nut to suit the large lower suspension/steering ball joint to suit all 750 & 101 Series cars. Part of the components can also be used to replace the large ball joint on the rear...

Set of 11 dust boots to suit all the track rod ends and ball joints on all 750/101 cars. Covers 6 track rod ends, 4 front suspension ball joints and 1 rear suspension ball joint.

This bush has two applications: Fits early (pre 1968 cars) front anti-roll bar (with curved drop links) in conjunction with SU055. 2 per car. 750/101/105 series cars. Also fits rear anti-roll bar on all 105 cars fitted with one. 2 bushes...

Rear axle/suspension bump stop to suit all 750, 101, 102 and 106 (2600) Series cars.

Dust cover for the large ball joint in the lower front suspension wishbone and also the ball joint on the rear suspension A arm on all 750 & 101 Series cars.

Rear wheel bearing (67mm outer diameter) to suit 750 Series and early 101 Series cars with the smaller diameter rear axles.

Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts. See item code SU023/1 for the equivalent part for the...

Rear half-shaft oil seal to suit 1300, 1600 & 1750 rear axles with the smaller diameter half-shafts used to approximately 1974. See item code SU026 for the equivalent seal for the larger style limited slip differentials used on 2000cc cars from 1972 and...