116 ALFETTA PARTS : IGNITION

Genuine Bosch points, later one piece type. Used on all aluminium distributors from 1968 onwards. Alternative supplier part available under IG017/1

Genuine Bosch distributor cap - later, straight clip type (clips located equidistant between plug lead connections) 1975-1993. Fits many 4 cylinder 105, 116 and 75 models.

Bosch type condenser suitable for all 105 series models (and some early Alfettas) 1969-74 with round section insulator & spade electrical connector.

Genuine Bosch condenser suitable for 105 and 116 series cars 1974-89 with square section insulator and spade connector.

Rotor arm to suit Marelli distributor with mechanical points.

Ignition points to suit Marelli distributor.

Ignition condenser to suit Marelli distributors from 750, 101, 102, 105, 106 and 116 Series cars.

Distributor cap to suit Marelli distributors with mechanical points.

12V ignition coil for 750, 101 and 105 series cars and 4 cylinder carb-equipped 116 and 75 models. NGK products are known for reliability!

Pertronix electronic ignition kit - for late 105 and early 116 series cars fitted with Marelli distributors. Delivers twice the power to the spark plugs, reliable starting every time! Uses Hall effect magnetic sensor in place of the points and unlike...

Pertronix electronic ignition kit - for late 105 series and early 116 series models with vacuum advance distributors. Delivers twice the power to the spark plugs, reliable starting every time! Uses Hall effect magnetic sensor in place of the points and...

Black high tension spark plug lead set. Wire wound silicone with short king lead to suit 105 series cars with the coil located on the inner wing. 7mm wire.

Black high tension spark plug lead set. Wire wound silicone with long king lead to suit 105 series cars with the coil located on the bulkhead and most 4 cylinder 116 models. 7mm wire.

High tension spark plug lead set. With long king lead to suit 105 series cars with the coil located on the bulkhead and most 4 cylinder 116 models. 7mm wire. Not silicone, if silicone is required, see IG003/1

High tension spark plug lead set. Wire wound silicone with long king lead to suit 105 series cars with the coil located on the bulkhead and most 4 cylinder 116 models. 7mm wire.

HT lead clamp, fitted to 105 series (not for early 105 series cars with screw in thermostat), 116 series and some 75s.

Ignition switch to suit late S3/all S4 Spiders, some 116 models including GTV6 and some 75 models. Note, 4 wires. Please note, this ignition switch might require slight wiring modification to fit your vehicle.