MONTREAL PARTS : OTHER FRONT SUSPENSION PARTS

Heavy duty Superflex 24mm front anti-roll bar bushes to suit standard front anti-roll bars. Sold as a pair.   

Front anti-roll bar rubber for standard anti-roll bar. Fits into bracket at the front of main chassis frame rails. Two bushes required for each car. Can be adapted to be used on 2000 (102) Touring and 2600 (106) series cars

This bush has two applications: Fits early (pre 1968 cars) front anti-roll bar (with curved drop links) in conjunction with SU055. 2 per car. 750/101/105 series cars. Also fits rear anti-roll bar on all 105 cars fitted with one. 2 bushes...

Front anti-roll bar end bush - 30mm diameter. Fits into each end of the drop link that connects from the anti-roll bar to the spring pan. Used on cars from 1968 onwards until the late 1980s. 4 bushes required per car. Also fits 2600 models as...

Front anti-roll bar drop link. Connects anti-roll bar to spring pan. Straight style that suits all cars from around 1968 to 1986. Two required per car. See part numbers SU102 and SU102/1 for later Spiders.

Superflex polyurethane front shock absorber lower bush. Price is for a pair of bushes. We recommend Superflex as they only use very high quality TDI polyurethane as opposed to NDI polyurethane used by many cheaper brands. One per front shock...

Set of (12) original style rubber bushes to fit the top of the front shock absorber and the top and bottom of the rear shock absorber on all 105 Series cars, including Montreals. For uprated polyurethane versions, see code SU018. ** NOTE** - does not...

Superflex polyurethane heavy duty shock absorber bush. Fits the upper section on front shock absorbers and top and bottom of the rear shock absorbers on all 105 Series cars. We recommend Superflex as they only use very high quality TDI...

10 mm thick aluminium front spring spacer - fits all 105 Series cars. Fits into spring pan.

7mm thick aluminium spacer for the front spring on all 105 Series cars. Fits into spring pan.

Rubber seat for front spring, Two fitted per front spring, four per car.

Metal seat for front spring. Two used per front spring, four per car.

Front spring pan - deep. Fits on the passenger side of all 105 Series cars except for Montreal which use two of these pans.

Top quality (Würth brand) Nylock nut to fit the 4 bolts that attach the front suspension spring pan to the wishbone, as well as each track rod end and the 4 bolts on the rear axle shafts that bolt up the wheel bearing housing on each side.

Mounting bolt for the front top suspension arm, all 105 series cars.

Mounting bolt for the bottom of the front shock absorber on 105 series cars. Bolts through bottom wishbone arms. Uses nuts with the part numbers SU200 and SU202.

Front bump stop upper for 105 and 116 models.

Front bump stop lower